5V20A Power Battery Capacity Tester 5v50a Testing Equipment Lithium Battery Charging and Discharging Machine Analyzer

5V20A（8ch）High-precision

energy-saving (feedback type) battery capacity tester

AITOP-BTS EC5208

ONE. Product Features:

uModular design, single-point control technology: easy expansion, high production and maintenance efficiency;

uChannel isolation and parallel technology are convenient for free combination and test in various occasions;

uCharge and discharge power factor 0.98, charge and discharge efficiency% 82 (Max 86%);

uMultiple charge and discharge protection functions to reduce the incidence of battery production accidents;

u The channel for discharging energy supplies other channels for charging energy or feeds back to the power grid, and the equipment heats up less and greatly reduces the energy consumption cost;

u The equipment accuracy is better than 0.1%, the data recording time is 1 second/time, the software function is powerful, and the man-machine interface is friendly;

Four-, realizing wide-range voltage and current regulation, suitable for various batteries;

2. Equipment description

BTS EC5 series battery capacity tester system is mainly designed for power , which can meet various performance testing requirements of power . The device has the characteristics of high power, high precision and high performance, and can perform charge and discharge tests and capacity division of batteries of 1-4.5V (voltage), 0.3-50A and other specifications.

Shenzhen Aitop Intelligent Equipment Co., Ltd.

Website:

us :

1. Machines which automatically Weld Nickel Sheet to Battery Electrode.

2. Used for battery factories automatical production in power banks, laptops and ebikes, etc.

3. Do 2000pcs welding per hour.

4. Touch screen operation, easy and fast responding.

5. 0-1 worker to operate the machine, fast and with great efficiency.

Can be connected to other machines to proceed automatically.

6. Air cooling, manual programming & CAD drawing input available.

7. Overseas sales office in New Delhi, India.

8. 12 months warranty and life-time maintenance.

Techinical Parameters:

Usage：

The shrink film is wrapped on the outside of the product or the package, and

after being heated, the shrink film shrinks and wraps the product or the

package, fully displays the appearance of the article, improves the product's

marketing performance, and increases the appearance and value. The articles

packaged by the heat shrinkable machine can be sealed, moisture-proof, and

anti-pollution, and protect the goods from external impact, and have a certain

cushioning property, especially when the package is fragile, which can prevent

the container from scattering when broken. In addition, it reduces the

possibility of products being dismantled and stolen. It is applied to light industry,

food, beverage, tableware, hotel supplies, stationery, arts and crafts, hardware

tools, daily necessities, chemical products, etc. It adopts electronic grade

variable speed transmission, which is stable and reliable, long life and low

noise.

Features：

1. The main electrical components are imported:

2, the device is small in size, short warm-up time, power saving

3. Adjust the width and narrowness of the reserved film before and after bag

making according to the specifications of the product, and match the shrinkage

ratio of different packaging films to achieve the ideal shrinkage effect;

3. The high-power circulating air motor is used to cooperate with the hot air

flow of the furnace wall to conduct the hot air transport, so that the furnace

produces uniform circulating air, the shrinkage effect is ideal and the heat

energy loss is greatly reduced;

4. The shrinking furnace conveyor chain adopts rod type conveying, and the

jacket has black high temperature resistant silicone tube, which is stable and

does not burn film;

5, using German imported conveyor belt, high strength, wear resistance;

6, the heating pipe is a stainless steel heating pipe, the normal service life of

5-10 years.

7.Suitable for packaging of regular or irregular items

Technical Parameter

Specifications: 600mmx400mm (width * height)

Packing product applicable specifications: 590mm wide * 390mm high * N long

(within)

Applicable packaging materials: PVC, POF, PE, PET, PP,

Temperature control: 0-300 ° C (adjustable)

Conveying speed: 0-12 m / min (adjustable)

Voltage: 380V (three-se four-/b>

Current: 32A

Power: 12KW

Shrinking furnace dimensions (length x width x height): 1000x600x400mm

Overall size (length x width x height)

Delivery method: stainless steel / L, (network / W optional),

Conveyor belt height from the ground: 750±5mm

Delivery load: about 5.0KG

Machine weight: 160KG

Homogenizer: 2

This machine is designed for test protecting voltage of over charge, recovery voltage of over charge, protecting voltage of over discharge, recovery voltage of over discharge, protecting current of over current, delayed performance of over current protecting total current self consumption 1~32 series power battery protection board testerApplication:TWSL-8856 multi-function PCB board testing system mainly faces the PCB board manufacturer and power battery pack manufacturer for detection of battery protecting board.Features:1, Short circuit protection test2, Self consumption of each PCB board test3, Equalizing current and balance voltage testDetailed configuration:Item Range AccuracyTest rate of series 1-32 series optional Over charge protecting voltage 0-5V ±5mVOver discharge protecting voltage 0-5V ±5mVOver charge recovery voltage 0-5V ±5mVOver discharge recovery voltage 0-5V ±5mVOver charge protecting current 0-50A ±0.1AOver discharge protecting current 0-120A ±0.1ABalanced turn-on voltage 0-5V ±5mVEquilibrium real time current 0-1000MA ±1mAOver current protection delay 0-8S ±1mSTotal self current consumption 0-10MA ±5uASingle self current consumption 0-500uA ±1uALoop resistance 0-200mΩ ±1mΩShort circuit protecting(more than 10 series) 0-9999u

Features: This machine is designed for test protecting voltage of over charge, recovery voltage of over charge, protecting voltage of over discharge, recovery voltage of over discharge, protecting current of over current, delayed performance of over current protecting total current self consumption 1~24 series power battery protection board tester.

Application:1~24/32 series power battery protection board tester multi-function PCB board testing system mainly faces the PCB board manufacturer and power battery pack manufacturer for detection of battery protecting board.

The main function features of the equipment

1.Each device can perform constant current and constant voltage charge and constant current discharge test on 512 batteries that meet the voltage range.

2.Using the constant current-constant voltage power supply of the invention patent, there is no impact from constant current to constant voltage switching, which is especially suitable for the requirements of lithium ion battery charging.

3.The device uses an AVR single-chip computer as the control center. With the external sampling circuit, it can be controlled by the superior computer. When connected to the computer, it can save the full charge and discharge curve of all channels, and can also be separated from the upper computer and complete the operation through the control panel. Constant current constant voltage charge, constant current discharge test, time sorting and other work.

4.Each battery fully has its own constant current and constant voltage source, and its own loop does not affect each other

5.Real-time detection of each battery voltage, charging, the first constant current charging, when the battery voltage reaches the set value, will be smoothly transferred to constant voltage charging, to meet the set time or current termination conditions, the charge is over. During constant current discharge, when the battery voltage is lower than the set value, the discharge is completed and the corresponding battery indicator lights up.

6.With the power-off protection function, the original work flow can be continued after the call.

7.The power tube uses 50N06, suitable for batteries that require lower discharge voltages, such as lithium iron ste batteries. 8.The upper computer can set 32 process parameters and 256 cycles. Each host computer can connect 1 to 20 sets of single-chip microcomputer systems (10 sets or less are recommended). 9.Supporting software features. 10.a) Using grac operation interface to display the data of each battery voltage, current, time, capacity, etc., and display the corresponding working status and abnormal conditions in various colors; 1.b) Any segmented battery capacity indication (up to 100 segments); 2.c) The data points can be recorded according to the voltage, current, and time variation conditions to form a complete charging and discharging curve data. The time interval of the curve data points is ≤ 4 seconds. 1.d) multiple conditions (capacity, time, open circuit voltage, discharge platform, etc.) for battery sorting; 1.e) automatically calculate the constant current charge ratio, capacity loss, discharge efficiency, average voltage, median voltage and other data; 1. f) Operator authority settings, classification operations; 2. g) can display charge and discharge curve diagram, cycle diagram;

Rechargeable Cylindrical 18650 3.7V 1200Mah-5000Mah Lithium Ion Battery

32140 3.2V 15Ah 48Wh LifePo4 Cylindrical Rechargeable Lithium Battery