This machine is mainly used for maintaining the cylinderof motorcycle,etc .
Place the cylinder to be borecd under the base plate or on the plane of the base of the machine after the center of the cylinder hole is determined ,and the cylinderis fixed, maintenanance of boring and honing can be carried out .
The cylinder of the motorcycles withdiameters 39-72mm and depths within 160mm can all be bored and honed .If the suitable fixtures are fitted ,other cylinder bodies with corresponding requirements can also be bored and honed.
MAIN SPECIFICATIONS:
MODEL | TM807A | |
DIAMETER OF BORING & HONING HOLE | Φ39-72mm | |
MAX. BORING & HONING DEPTH | 160mm | |
STEPS OF VARIABLE SPEED OF BORING/HONING SPINDLE | 1 step | |
BORING | ROTATIONAL SPEED OF BORING SPINDLE | 480r/min |
FEED OF BORING SPINDLE | 0.09mm/r | |
RETURN AND RISE MODE OF BORING SPINDLE | HAND OPERATED | |
HONING | ROTATIONAL SPEED OF HONING SPINDLE | 300r/min |
HONING SPINDLE FEEDING SPEED | 6.5m/min | |
ELECTRIC MOTOR | POWER | 0.75kw |
ROTATIONAL SPEED | 1400r/min | |
VOLTAGE | 220/380v | |
FREQUENCY | 50Hz | |
MACHINE N.W./G.W. | 230kg/280kg | |
OVERALL DIMENSIONS |
Tell Us What You NEED
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
Ok
|