Size(mm) | Thickness(mm) | Thickness(mm) | Thickness(mm) |
50×50 | 1.0 | 1.2 | 1.5 |
75×50 | 1.0 | 1.2 | 1.5 |
100×50 | 1.0 | 1.2 | 1.5 |
100×75 | 1.0 | 1.2 | 1.5 |
100×100 | 1.0 | 1.2 | 1.5 |
150×50 | 1.0 | 1.2 | 1.5 |
150×75 | 1.0 | 1.2 | 1.5 |
150×100 | 1.0 | 1.2 | 1.5 |
200×100 | 1.0 | 1.5 | 2 |
250×100 | 1.0 | 1.5 | 2 |
300×100 | 1.0 | 1.5 | 2 |
300×150 | 1.0 | 1.5 | 2 |
400×100 | 1.0 | 1.5 | 2 |
400×150 | 1.0 | 1.5 | 2 |
500×100 | 1.0 | 1.5 | 2 |
500×150 | 1.0 | 1.5 | 2 |
600*100 | 1.0 | 1.5 | 2 |
600*200 | 1.2 | 1.5 | 2 |
800*200 | 1.2 | 1.5 | 2 |
The advantages of our Cable Tray :1. Low cost, significant cost savings compared to standard traditional tray products.2. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.3. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.4.Flexible, easy and fast installation. Design allows cable exit or entry at any point.5.Cables can be secured to clamps or ties.6.Various hardware accessories available to fix, support and install.7.Safe smooth edge design to protect cable.8.Easy for k and cleaning , easy maintained.9.All sharp ends are cut off to protect cables. Weight loading capacity is 27% stronger than traditional cable trays and cable ladders.
1. HDG-Normally the thickness of zinc is between 40 micron-65 micron on average.This finishing is widely used in outdoor projects and corrosive environment.2. Pre-galvanized steel sheet:in accordance with ASTM 653/A 653M. The coating is smooth,ductile and adherent.This finish is suitable indoors.3.Powder coating:any color you can choose.It is good looking and good at corrosion resistance.Normally it is used in indoor projects.