The table below compares the magnetic performance of neodymium magnets with other types of permanent magnets.
Magnet | Mr (T) | Hci (kA/m) | BHmax (kJ/m3) | TC (°C) |
Nd2Fe14B (sintered) | 1.0–1.4 | 750–2000 | 200–440 | 310–400 |
Nd2Fe14B (bonded) | 0.6–0.7 | 600–1200 | 60–100 | 310–400 |
SmCo5 (sintered) | 0.8–1.1 | 600–2000 | 120–200 | 720 |
Sm(Co, Fe, Cu, Zr)7 (sintered) | 0.9–1.15 | 450–1300 | 150–240 | 800 |
Alnico (sintered) | 0.6–1.4 | 275 | 10–88 | 700–860 |
Sr-ferrite (sintered) | 0.2–0.4 | 100–300 | 10–40 | 450 |
sical and mechanical properties
Comparison of sical properties of sintered neodymium and Sm-Co magnets | ||
Property | Neodymium | Sm-Co |
Remanence (T) | 1–1.3 | 0.82–1.16 |
Coercivity (MA/m) | 0.875–1.99 | 0.493–1.59 |
Permeability | 1.05 | 1.05 |
Temperature coefficient of remanence (%/K) | –0.12 | –0.03 |
Temperature coefficient of coercivity (%/K) | –0.55..–0.65 | –0.15..–0.30 |
Curie temperature (°C) | 320 | 800 |
Density (g/cm3) | 7.3–7.5 | 8.2–8.4 |
CTE, magnetizing direction (1/K) | 5.2×10–6 | 5.2×10–6 |
CTE, normal to magnetizing direction (1/K) | –0.8×10–6 | 11×10–6 |
Flexural strength (N/mm2) | 250 | 150 |
Compressive strength (N/mm2) | 1100 | 800 |
Tensile strength (N/mm2) | 75 | 35 |
Vickers hardness (HV) | 550–650 | 500–550 |
Electrical resistivity (Ω·cm) | (110–170)×10–6 | 86×10–6 |
Our main products are: 1,Metal injection molding, made from the stainless steel, tungsten, Iron-base alloy, tool steel, hard metal alloy. 2,Rare earth magnet, including sintered Neodymium-Iron-Boron, bonded Neodymium-Iron-Boron, sintered Samarium-Cobalt. All magnets are supplied in a wide range of shapes such as: rectangular blocks, discs, rings and segments. 3,Ferrite magnet: Hard ferrite magnet and soft ferrite magnet including the MnZn and NiZn. 4,Die-cast component, made from zinc, aluminum, magnesium alloys. Other quality management SPC dada statistics., Advanced inspection equipments, Staff education, APQP FMEA , PPAP , SPC , MSA , 6 sigma , MIL-STD M105E Standard Ac=0 Sampling Method ( Zero Defect Plan ) , Traceable lot naming method .
♣ Please do not hesitate to us with the following infomation if you have intention of purchasing,thanks
1.Drawings or samples (offering both will be preferred).
2.Purchasing quantity per order.
3.Purchasing quantity per year.
4.Materials and other requirements.