Pneumatic Conveying Vacuum Conveyor Positive Pressure

1)Â Â Â Â Â Introduction:

Â

material enters the conveying pipe from the sending tank, and the compressed gas is opened and closed at a certain frequency through the solenoid valve to form a pulsed air flow (air knife ) . The static pressure difference is used as the driving force to push the material forward. After reaching the separation device for material and gas separation, the material falls into the silo, and the gas is discharged into the atmosre to realize transportation.

2)Â Â Â Â Â Features:

1. Low flow rate but large conveying capacity, almost no effect on material quality.

2. The system has higher pressure and lower air consumption.

3. The control system is automated, and the requirements for various electrical components are high.

4. Multi-point feeding and multi-point unloading.

5. The sending tank (also known as the silo pump) is a pressure vessel, which is a mandatory signing equipment.

6. The air source is generally a screw air compressor, and the post-processing equipment must be matched.

3)Â Â Â Â Â Parameters

1. Positive pressure dense se dynamic pressure conveying, air speed: 8m/s ~ 15m/s, delivery capacity: ~ 50t/h , conveying distance: maximum 2000m, air source type: compressor

2. Positive pressure dense se plug conveying, air speed: 1m/s ~ 8m/s , conveying capacity: ~ 50t/h , conveying distance: maximum 1000m, air source type: compressor