Negative Pressure Pneumatic Conveying Vacuum Conveyor

1)Â Â Â Â Â Introduction

The negative pressure conveyor conveys the material through negative pressure. The conveying process adopts closed pipesportation, and there is no leakage of dust; the particle size of the conveyed material ranges from 0.2 microns to 1 mm, and we use imported filter materials. Ti07 type filter, the filtration ratio is 99.99%, no dust will leak into the environment through the filter. The noise of the system is less than 70 decibels during operation.

Â

2)Â Â Â Â Â Working principle

The negative pressure conveyor forms a negative pressure airflow under the vacuum. Under the action of this airflow, the conveyed materials are instantly transported to another container through the suction hose or pipe . Since the material is always in a vacuum state during the conveying process, even if a pipe occurs, the material will not leak into the surrounding environment.

Working procedure:

A. The Roots blower works to generate vacuum in the separation container of the vacuum conveying equipment. Inhale the material from the feed port through the suction hose and the suction port

B. Separate air and materials in the filter bin of the separation container, and collect the materials in the bin. Cyclone separators prevent fine powder from entering the filter to increase the efficiency of the filter.

C. When the silo is full of materials, the converter is automatically closed, and the pressure in the conveying equipment reaches a balance. The discharge valve is opened, and the material flows out through the discharge port and directly falls into the storage container.

D. The discharge compartment is closed, and the entire conveying process is started again.

3)Â Â Â Â Â Equipment components

The equipment is mainly composed of Roots blower, filter bin and filter, recoil air bag, separation bin, silo, pneumatically controlled feeding valve, pneumatically controlled vibrator, quick-open connection clamp, sealing ring (natural silicone rubber), The air control controller and the connection system are composed together.

4)Â Â Â Â Â Product features:

 Simple: PLC automatic control;

Hygiene: Meet GMP standards and meet CIP requirements;

Clean: Dust-free operation, the conveying process will not cause pollution to the environment ; Economical: Low maintenance costs;Â

Main Parameter

Â