Product Application
1 This machine is used for pre-pressing process of making plywood, block board and decorative board.2 The whole structure is designed and manufactured based on advanced international experience and new technological requirements.3 The electric system and hydraulic system of the machine have been examined precisely and the free-beam will not fall by its own gravity with results assuring exnt quality.4 The cylinder is made of super-hard metal,and the seal use low-resistance stepped gaskets, no leakage.
Hot Press Machine For Plywood | |||
Max pressure: | 500 Tons | Weight: | 35Tons |
Board feeding direction: | Transverse | Layer spacing: | 70mm |
Layers: | 15 Layers | of plate: | 16pcs |
Cylinder: | 2*360*1050mm | Cylinder: | 1*180*1050mm |
Stroke: | 1050mm | Compression resistance: | =<25Mpa |
Total power: | 7.5+18.5kw | Thickness of the frame: | 35mmQ235 |
Low pressure pump flowing: | 250ml/r*pcs | High pressure pump flowing: | 100ml/r*pcs |
Working methods: | Full automatic | Upper and bottom beam: | 900mm |