Apprearence | White crystals |
Molecular Weight(Million) | 3-12miilion |
Insoluble Content (%) | ≤0.2 |
Residual Monomer (%) | ≤0.05 |
Degree of hydrolysis (%) | 5-80 |
Sample | For free |
High Efficient Cationic Polyacrylamide/Flocculant/Polymer msds
Polyacrylamide, abbr. PAM, is a kind of water soluble polymer,It is most often used to increase the viscosity of water (creating a thicker solution) or to encourage flocculation of particles present in water. Cationic Polyacrylamide, copolymerized by cationic monomer and acrylamide, is a wafer soluble and ganic polymer with high molecular weight.
Cationic Polyacrylamide | Apperance | Solid Content | Cationic degree | Molecular weight |
White Powder |
â¥90% |
Low | Low | |
Medium | ||||
High | ||||
Medium | Low | |||
Medium | ||||
High | ||||
High | Low | |||
Medium | ||||
High |
1. It is mainly used for the sludge dewatering and decrease the rate of water content of sludge.
2. It can be used to treat industrial wastewater for Sugar Makingï¼dyeing and life sewage water
3.It also used for treatment of wastewater of paper industryï¼to improve dry and wet strength of paper to increase the reservation of tiny fibers and fillings.
4.Drinking water treatment
Application Method:
1. The product should be prepared for the water solution of 0.1% as concentration. It is better to use neutral and desalted water.2. The product should be scattered evenly in the stirring water, and the dissolving can be accelerated by warming the water (below 50â)3. The most economical dosage can be determined based on a preliminary test. The value of the water to be treated should be adjusted before the treatment.
Being used, PAM should be dissolved in solution of 0.1-0.2%. If not use the matched dissolving and dosing system, a solution should be put in the diluted cans. Practice on machine via screw pump and adjust the amount according to the actual situation.
Package and Storage:
1. The solid product can be packed in inner plastic bags, and further in polypropylene woven bags with each bag containing 25Kg.
2. This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35°C.
3. The solid product should be prevented from scattering on the ground because the hygroscopic powder can cause slipperiness.