VTM DISPENSER | SEMI AUTOMATIC VTM LIQUID DISPENSER

TECHNICAL SPECIFICATIONS:

• • Two Peristaltic pumps with a single controller; each works independently with the same volume or different volume as per selection.
  • Joint less tube from suction to delivery end.
  • Calibration software assists to calibrate the volume, if any variation due to tube ageing.
  • Provided a special cap with joint less tube fitting arrangement for easy unscrew and screwing the cap while replacing the bottle.
  • Pump speed selectable in three speeds: 60, 90, 120 rpm.
  • Filling time will be less than 1sec/tube/pump of 3mI VTM at 60 rpm.
  • 1800 Tubes per hour, (3mI VTM can be filled in 1hr with 60 Rpm, practically 4secs/tube).Cap opening, liquid filling and cap retightening will be within 4 seconds.
  • Joint less tube – Special silicone tubes with autoclavable provided to suit as per medical requirements.
  • User friendly independent foot pedal Operating system for both operators.
  • Touch screen HMI display – 4.8″.
  • Power Supply: 230V AC/50Hz, 5A.
  • Self-prime mode for easy liquid loading by using push buttons for both the pumps separately.
  • Microprocessor based stepper motor drive.
  • Counter for counting the of tubes dispensed.
  • Provision for autoclavable comes with a nitrogen cylinder and regulator. Gas to be filled inside the dispensing tube before and after the usage of dispensing.