Type | ED |
Place of Origin | Henan, China |
Diameters | 8-54mm |
Hot Zone | 150 - 2400mm |
General Description:
Made of high-density recrystallized silicon carbide, a U Shape Silicon Carbide Heating ctured by welding two carefully-matched SiC rods with a thickened silicon carbide bridge. This for wiring both tail ends from one side of the furnace. The tail ends of the cold ends are metallized with aluminum, which can provide a low-resistance surface to the electrical connections made using flat aluminum braids held in compression to the circumference by a stainless steel spring clamp.
Since a U Shape Silicon Carbide Heating ed of two ED Silicon Carbide Heating a cold end, it can be connected by the power cord at one end of the furnace. It is mainly used in kilns with high furnace temperature and high temperature uniformity. Its characteristics are electricity saving and long service life.
In addition, a furnace with an energy saving structure can be built because the of heating the furnace can be reduced compared with the ED or DB types. These ly used as high-temperature heat sources for electric furnaces and for the firing of ceramic capacitors, ferrites and other electronic components.
Specific Gravity | 2.6-2.8g/cm3 | Bend Strength | >300kg |
Hardness | >9 MOH'S | Tensile Strength | >150kg/cm3 |
Porosity Rate | <30% | Radiancy | 0.85 |
Used in various high temperature electric furnaces and other electric heating devices, such as in the industries of magnet, ceramics, metallurgy, glass, and machinery.
Type: ED (Equal Diameter);
OD: Outer Diameter;
HZ: Hot Zone;
CZ: Cold Zone;
OL: Overall Length;
Resistance; Ohms (Ω)
Examples: Type ED with 54mm-OD, 1600mm-HZ, 400mm-CZ, 2400mm-OL, Resistance 0.90Ω
Specified as:
ED, OD /Hot Zone length/Overall length/resistance
ED 54/1600/2400/0.90Ω