Raynool Passive Component Splitter Termination Load Attenuator

Raynool Passive Component Splitter Termination Load Attenuator

Â

Low PIM Attenuator

Â

Low PIM Attenuator are used to reduce the power of a RF isturbing or decreasing the waveform of the ntly, , and is able to block out unwanted Attenuator ranges from 3 to 20 dB, power rated to 200W, for interface, N type is more available at the market.

Â

Low PIM Power Splitter (Divider)

Â

Low PIM Power Splitter is used to split the r in a Low PIM system, cover all lar frequency range, from 698MHz to 2700MHz. Available in 2 way, 3 way, 4 way model. Interface is N Female, or 4.3-10 Female, or DIN Female.

Â

the power splitter with a spec of -160 dBc at 2*20 watts is an indispensable part to the performance of DAS system.

Â

Low PIM Combiner

Â

The Combiner combines two ers in the band to a single antenna feed or distribution cable with minimum intermodulation. In some circumstance combiner can be used as a splitter, while the power handing is different.

Â

Splitters and combiners look similar but each device serves a different purpose. Splitters evenly separate output legs, then send the ers or tuners. Combiners take or more sources then merge them onto a single >

Â

Low PIM Directional Coupler

Â

An essential feature of directional couplers is that they only couple power flowing in one direction. Power entering the output port is coupled to the isolated port but not to the coupled port. A directional coupler designed to split power equally between two ports is called a hybrid coupler.

Â

Low PIM couplers ranges from 678 to 2,700 MHz, with a broad range of coupling values: 6, 10, 15, 20, and 30 dB, power rated to 200W and three different connector types: N, DIN, 4.3-10.

Low PIM Termination Load

Â

Low PIM Termination Load are used to prevent a g reflected back from each end, causing interference, or power loss, and is able to block out unwanted o:p>

Â

Low PIM Termination Load frequency Range from DC to 6 GHz, power rated to 200W, with SMA, N, DIN, 4.3-10 interface.