RDS3 Series Dual Power Auto Transfer Switch,Static transfer switch
Radin Electric provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements.
| Product Name | RDS3 Series Dual Power Automatic Transfer Switch |
| Type | PC Type |
| Material Of Cover | PC |
| Standard | GB/T14048.11 |
| Poles | 3P/4P |
| Current | 16A-630A |
| Controller Type | A: Basic type single se monitor B:Standard type three se monitor + fire-fighting,generator control C: Intelligent type three se monitor+fire-fight, generator control+LCD display |
| Use Category | AC-33B |
| Type | RDS3-125 | RDS3-250 | RDS3-630 |
| Rated Working current (A) le | 16A-125A | 140A-250A | 315A-630A |
| Rated Working voltage (V) Ue | 400 | 400 | 400 |
| Rated Insulation voltage (V) Ui | 800 | 800 | 800 |
| Rated short time withstand current (KA,rms) Icw | 10KA (200MS) | 10KA (200MS) | 25KA (200MS) |
| Rated short circuit making capacity (KA,peak) Icm | 20KA | 30KA | 50KA |
| Rated control power supply voltage (V) Us | 230V/50HZ | 230V/50HZ | 230V/50HZ |
| transfer time (s) | 1.5 | 1.8 | 2 |
About ATSNEW FEATURES ARRIVAL:1, RS485 communication function available with RDS3 type.2, Generator exerciser timer (Engine exerciser) is available, user can set the generator start daily, weekly or monthly. You can also choose the generator exerciser load mode, to test the generator on load or off-load. It is applied to the place where generator is not frequently used.3, Under manual mode, by press "+" button to start or stop the generator manually.4, High and low Frequency (Hz) protection.5, ATS setting menu with password protected.RDS3 Series PC class dual power Auto transfer switch, mainly used in two way power supply system with rated voltage below 400V, AC 50/60Hz, rated current up to 630A, when one power supply abnormal, then it transfer between two power supply system, to ensure the power supply reliablity and safety. The ATS have " Main Power", "Backup Power" and "Two way OFF" positions, with higher breaking and making capacity, it not only can meet normal load transfer, but also can meet high inductive impedance or big motor load transfer, meanwhile due to have high short time withstand current capacity, no need special SPCD, doesn't affect the selective of inside circuit, meanwhile it also can meet the application at big capacity power supply side. Product confirm to GB/T14048.11<<Low voltage switch equipment and control equipment Part 6-1: multi-funtional transfer switch equipment>> StandardRDS3 Advantages:a. Control power voltage:AC 230Vb. Auto Transfer: Auto transfer auto recovery,auto transfer no auto recovery,power grid-generatorc. Manual transfer: Manual main power,manual backup power,manual OFFd. Isolation lock: Off position have isolation function,also can padlock lockede. Generator control: Generator start and stopf. Fire linkage: With passove fire linkage OFF the device,with one set passive NO feedback g. Display mode: Mechanical indication;device ON/OFF status operating modeLED: device ON/OFF status,power statusLCD: device ON/OFF status,power status,data settingh. Setting mode: Key-press operation,Chinese/English display interface,can set the working mode,low-voltage value, over-voltage value, delay time, auto transfer mode etc.i. Power monitoring: ABC three se over-voltage (240-290v adjustable) ABC three se low-voltage (150-200v adjustable) ABC three se missing monitor j. Delay time: Transfer delay (0-300s adjustable) Recovery delay (0-300s adjustable) Generator start,stop delay (0-300s adjustable)k. Mounting mode: Integated mountingController Type:A: Basic type single se monitorB. Standard type threee se monitor+fire-fighting,generator controlC: Intelligent type three se monitor+ fire-fighting,generator control+LCD displayD: Intelligent type three se monitor+ fire-fighting,generator control+split LCD displayWorking conditionsa. Ambient temperature: -20ºC---+40ºC; 24 hours average not more than +35ºCb. Atmosric conditions: humidity not more than 50% at max. +40ºC,higher humidity is allowed at lower temperature,at most wet month,the average max humidity is 90% at the average min temperature +25ºC,and have considered the condensation on the product surface due to temperature variation;c. Altitude: Not more than 2000md. Pollution Class: The installation site environment pollution class 3
Dlivery TermsShipment & Express & Air expressPackingAbout the CompanyWe've got CE, TUV, KEMA, CCC certificate for ATS which also meets the ISO9001 standard and the factory has go through SGS test.FAQ:1. What's the warranty term?24 Monthes.2.How long does it take to deliver my goods?Normally, samples can be delivered in 2 days. Customer designed sampleswill be delivered in 3-7 days.3. Do you offer sample?Yes, we offer sample order for customer to test the goods.4. What kinds of payment terms do you accept?We offer kinds of payment ways foe customer to chose from. T/T,L/C,Aliexpress, etc.5. What if there's quality peoblem?We offer replacement for the goods as soon as there is a quality problem with the goods, and the fright is on our account to cut down the customer's loss to the lowest.We are sure any of your questions will get our prompt reply, just leave the message!
