| Size | 1.6mm |
| Application | Arc Spraying |
| Spool Type | D 270 |
| Wire Weight | 15kg Each Spool |
| Wire Type | Cored Wire |
| Coating Hardness | 65~70 HRC |
| Amorphous Alloy | Vecalloy B |
DescriptionAmorus Alloy is a cored lly designed for arc spray systems. It produces an amorus, hard, abrasive and corrosion resistant coating, with a service environment up to 1700° F. The inclusion of 2.0% aluminum in the formulation results in extremely high bond strength and particle to particle adhesion. High chrome like finishes can be obtained by typical grinding and lapping techniques. Vecalloy B can be used in a wide variety of high wear applications, anti-skid surfacing applications and corrosive environments. It can equivalent to Vecalloy B.
ApplicationsBoiler Tubes & Tube ShieldsYankee Dryer RollsAnti-SkidFan BladesDrill CollarsHydraulic Shafts
Product DetailsChemical composition
| Grade | Chemical composition(%) | |||||||
| Vecalloy B | Cr | Nb | B | Ni | Si | Mn | Al | Fe |
| 13 | 6 | 4 | 6 | 1 | 1 | 3 | Balance | |
Typical Deposit Characteristics
| Typical Hardness | Bond Strength | Deposit Rate | Deposit Efficiency | Corrosion Resistance |
| HRC 65-70 | 10000 psi | 10 lbs/hr/100A | 80% | Exnt |
Sizes & Packaging
| Diameter | Packaging | d> |
| 1/16" (1.6mm) | MIG (D 300) | 15kg((33 lb)/spool |
Note that special sizes or packing requirements are available on all requests.
Signup today to claim your Discount. Get Started before it's too late!
