JH Series 28.7–92kW (39–125HP) Three and four-cylinder direct injection diesels with heat exchanger cooling. Choices of natural aspiration, turbocharged and turbo/aftercooler models, with straight drive or angle drive transmissions. Smaller horsepower models are also offered with Saildrive units. JH Series 4JH4-HTE (100HP/74kW) Light, compact, powerful, clean running four-cylinder diesel, developing 100HP (74kW) at 3,800 rpm. Straight or angle transmission, mechanical or hydraulic.
Specifications
Rated Output80.9 kW / 110 mhpRated Speed3200 rpmDisplacement1.995 L / 121.7 cu. inNo. of cylinders4 cylindersCylinder Bore x Stroke84 mm x 90 mm / 3.31 in x 3.54 inCombustion systemDirect Injection, Bosch Distributor Type VE PumpAspirationTurbocharged & IntercooledAlternator12V - 125ADry weight without gear217 kg / 478 lbsDimensions933 mm x 661 mm x 659 mmControlsMechanicalCertifications
RCD 1 EPA Tier 2 BSO II EMC SOLASNOTE:1 kW = 1.3596 mhp = 1.34102 bhpFuel condition: density at 15°C = 0.842 g/cm³Technical data is according to (ISO 8665) / (ISO 3046)Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)Length includes KM4A2 marine gear(Dimensions may vary with other gears/elbow)
Standard Engine Package
- Exhaust mixing elbow [L-type]
- Alternator 12V – 125A
- B20 panel
- Flexible mounts
- Expansion tank for fresh water cooling system
- Electric stop solenoid
Optional Accessories
- High-riser mixing elbow [instead of L-elbow]
- Secondary alternator 12V – 130A or 24V – 75A including smart regulator
- C30 panel
- Extension 4m, 6m, 10m]
- Dual harness [for 2nd station]
- TFX Sidemount control head
- SOLAS including Certificate [factory fit only]
- Hot water kit with cocks
- Extension saildrive leg [75 mm]
- Propeller cone nut kit SD60
- Air heater [glow]
- Trolling valve [only for KMH4A]
- On-board spare parts kit
New Yanmar 4JH4-HTE 110HP Inboard Diesel Engine - Sale !!
