Infrared Automatic Hand Sanitizer Dispenser

INSTRUCTIONS FOR USE:

When the dispenser is receiving power, the LED will flash GREEN and RED to let your know it is functioning. When in standy, the LED will flash GREEN every five seconds.

Open front cover and press ON / OFF to turn the dispenser on or off.(ON:the LED will flash GREEN; OFF: the LED will flash RED).Open front cover and press ON / OFF to turn the dispenser on or off.

Press the button, the LED will flash GREEN once to indicate that the ed, the LED will be in GREEN and the dispenser will discharge one dose when you trip the sensors.(ON:the LED will flash GREEN; OFF: the LED will flash RED).

Press the button, the LED will flash GREEN twice to indicate that the ed, the LED will be in GREEN and the dispenser will discharge two doses when you trip the sensors.

When use at first time,trip the sensors underneath with the hand 5 ~ 8 times, the liquid can be discharged normally after the air is exhausted.

The soap dispenser is not working when the cover is opened. Please close the front cover after adjusting the liquid discharge position.

INSTRUCTIONS FOR CLEANING OR REPLACING THE FILTER:

This content applies: Foam soap dispenser, it is recommended to clean

or replace filter accessories in the following cases:

1-No foam or little foam

2-Stop for one week after use

3-Used for more than 3 months

4-The LED flashes RED and GREEN continously,check if the filter is blocked

LED:

1.When the dispenser is powered on or the dose is adjusted, LED will flash GREEN 1 or 2 times continuously.

2. The LED will flash GREEN every five seconds when in standby.

3.The GREEN LED will light up when the dispenser is discharging doses.

4. The LED will flash RED when battery is in low power; The LED will flash RED and GREEN at same time when battery is in deep low power.

5.The LED will flash GREEN and RED alternately when the dispenser senses abnormalities, such as: filter clogging, power exhaustion, no liquid discharge,etc.. If the abnormality is eliminated, shut down and restart to return to normal.

6.The LED wil flash GREEN continuously when there is an obstacle below the dispenser, remove the obstacle to return normal.

SPECIFICATIONS:

If you choose the dispenser of gel/liquid ( ), please refer to the following instructions

NAME:Automatic liquid Hand Sanitizer Dispenser

MODEL:IDEALPRO108

INDUCTION WAY:infrared reflection

INDUCTION DISTANCE:the shortest 3CM the longest 10 ± 2CM

MATERIAL:ABS、PP

CAPACITY:1000ml

REFILLABLE LIQUID:milky liquid (such as: shampoo, shower gel, hand soap, etc.)

DISPENSING:gel/liquid

DOSE:0.8ml ,1.6ml

BATTERY:4 or 8 AA alkaeries

POWER ADAPTER:Input voltage AC100~240V 50/60Hz,Output voltage: DC6.0V 2A(Optional,it is not included by default)

If you choose the dispenser of foam ( ), please refer to the following instructions

NAME:Automatic liquid Hand Sanitizer Dispenser

MODEL:IDEALPRO128

INDUCTION WAY:infrared reflection

INDUCTION DISTANCE:the shortest 3CM the longest 10 ± 2CM

MATERIAL:ABS、PP

CAPACITY:1000ml

REFILLABLE LIQUID:foam soap

DISPENSING:foam

DOSE:0.8ml ,1.6ml

BATTERY:4 or 8 AA alkaeries

POWER ADAPTER:Input voltage AC100~240V 50/60Hz,Output voltage: DC6.0V 2A(Optional,it is not included by default)