Automatic EPS Shape Moulding Machine With Vacuum(Fast)This machine has many improvements copared to the basic type machine and the features are as follows:Mechanical Structure :1. using 16/25mm welded steel plate,greatly improve the strength of steel and equipment .2. after tempering prevent form deformation.3. after sand-blasting ,greatly improve corrosion performance and service life of the equipment .4. after sand-blasting,anti-rust spray zinc -rich primer,rust greatly improve equipment performance and service life.Steam System :Flow control valve and Japan with large pressure sensor controled so that theheating accuracy ,precise pressure is reached 20% reduction in energy consumption .Cooling System :Vertical vacuum barrel ,with a vacuum cooling spray device ,vacuum pump
Item | Unit | PSSM100F | PSSM120F | PSSM140F | PSSM160F | PSSM170F | PSSM180F | PSSM200F |
Mould Dimension | mm | 1000X800 | 1200X1000 | 1400X1200 | 1600X1400 | 1700X1500 | 1800X1600 | 2000X1800 |
Max Product Dimension | mm | 850X650X350 | 1050X850X350 | 1250X1050X350 | 1450X1350X350 | 1550X1350X350 | 1650X1450X350 | 1850X1650X350 |
Stroke | mm | 110-1360 | 110-1360 | 170-1420 | 170-1420 | 170-1420 | 120-1370 | 40-1290 |
Steam Inlet | mm | DN65 | DN80 | DN100 | DN100 | DN100 | DN100 | DN100 |
Steam Consumption | t/t | (9-13t)Steam of 1t Material | ||||||
Cooling Water inlet | mm | DN65 | DN80 | DN80 | DN80 | DN80 | DN80 | DN100 |
Cooling WaterConsumption | kg/cycle | 40-110 | 45-130 | 55-150 | 60-180 | 70-190 | 90-200 | 100-220 |
Compressed Air Inlet | mm | DN40 | DN40 | DN40 | DN40 | DN50 | DN50 | DN50 |
Compressed AirConsumption | m³/cycle | 1.2 | 1.5 | 1.8 | 2 | 2.2 | 2.4 | 3 |
Vacuum PumpCapacity | m³/h | 165 | 165 | 230 | 230 | 280 | 280 | 280 |
Drainage Port | mm | DN125 | DN125 | DN150 | DN150 | DN150 | DN150 | DN150 |
Connected Load | kw | 11 | 11 | 13 | 17 | 17 | 17 | 20 |
Outside Dimension | mm |