INTRODUCTION
Tag.Tile A3 is high quality cement based tile adhesive, instantly used after mixing with water for strong bonding and high construction productivity
PROPERTIES
• High bonding ability
• Particularly suitable for ceramic on cement floors and walls
• Suitable for small and medium sites and normally dry areas
• Qualified Low VOCs standard - safe for health
• Suitable to apply on Granite and Marble
| TECHNICAL DATA | Tag.Tile A3 | |
| Average consumption | 1.4kgs/m2 per 1 mm thickness | |
| Powder density | ~1.4g/cm3 | |
| Time for optimum chemical composition effects | 3-4 mins | |
| Pot life | 2 hours | |
| Opening time | 15 mins | |
| Tile fixing time | 15 mins | |
| Recommended thickness | 2-10mm | |
| Waiting time before grouting | at least 24 hours | |
| Set to light foot traffic | Â Â Â Â Â after 24-48 hours | |
| Â | Â | |
| QUALITY CERTIFICATION | ||
| Criteria | ISO 13007 AND TCVN 7899 | |
| C1 Standard | Tag.Tile A3 (C1) | |
| Tensile adhesion strength after 28 days | ≥ 0.5 N/mm2 | 1.74 N/mm2 |
| Tensile adhesion strength after water immersion | ≥ 0.5 N/mm2 | 1.76 N/mm2 |
| Tensile adhesion strength after heating | ≥ 0.5 N/mm2 | 0.57 N/mm2 |
PACKAGING:Â Â Â 25kgs/bag - Colors: Grey
 CONSUMPTION: Average 5m2/25kgs
Signup today to claim your Discount. Get Started before it's too late!
