Channel | 1 |
Display | LCD |
N6900 Series Distributed High Power DC Electronic Load Product IntroductionN6900 series is developed based on NGI's years of experience in testing for power supply, battery, generator and supercapacitor. It is with high accuracy, high reliability and high cost performance.According to the features of high voltage & power DC electronic loads with complex structures, harsh operatingenvironments, high reliability requirements, and inconvenient maintenance, NGI has made a of optimization based on the international advanced technology.Application Fields1. Generator2. Charging station3. Industrial/server power supply4. Communication power supply5. Battery pack6. High current relay7. Energy storage system8. Capacitor moduleMain Features*Power range: 1-500kW, customization available*Voltage rangeV/1200V, customization available*Multiple protection: OCP, OVP, OTP, OPP and reverse polarity warning*Comprehensive MOS protection to avoid blow-up*Operation modes: CC/CV/CR/CP*Charging & discharging control function, convenient for battery and super capacitor test*Built-in ESR test function(Optional)*Easy power expansion by increasing power modules*Analog programming interface(APG), current monitoring interface, and remote/local trigger function*CR/CP function supported by hardware Short-circuit simulation*Transient over-power loading capability*High power density, minimizing space occupation*Convenient OCP test*Dynamic mode up to 20KHz, editable rise and fall slew rate*Editable Von/Voff, reducing test accidents*LCD screen for data display*Intelligent fan control*Built-in auto test function*Standard 19-inch 3U, available for rack installation*Distributed design and flexible power modules*Multiple communication interfaces: LAN/CAN/RS232/GPIB(optional)Dynamic modeN6900 series provides three options for dynamic: continuous, toggle and pulse. The dynamic rate is up to 20kHz and can be adjustable. This function is often used to test power supply transient performance, battery protection board protection performance and battery pulse charging.Auto test functionThe auto test can be used to simulate waveform. This function can improve the test efficiency and can be achieved by SEQ function on the menu. Up to 100 sequence files editing is supported. Each file can support 50 steps.Charge& discharge testUsers can set different conditions on the front panel to meet their test demands. For example, when battery voltage is lower than initial voltage, N6900 internal counter will start counting. The counter will stop workinguntil the battery voltage drops to cut-off voltage.