Apperance | White powder |
Application | Coating, paper coating, etc. |
Chemical Composition
PTFE
Technical Parameters
Nature of the Product | PTFE-0107 | |
Appearance |
| White Powder |
Particle Size μm |
|
|
| Dv50 | 5 |
| Dv90 | 10 |
Melting Point â |
| 320 |
Characteristics and Purposes
à The micronized wax PTFE-0107 has very good heat resistance, lubricity, dispersity, and storage stability.
à Can make the products with very low friction coefficient when added into coatings and inks, improve the abrasion resistance,scratch resistance and lubricity of the coating.
à With the addition level at 0.1%~3%, can obviously improve the lubricity of the inks, improve the abrasion resistance of the finished products, avoid paper bonding.
à Be used in powder coating, the micronized PTFE wax provides a distinct performance on scratch resistance.
Addition level and Processing instructions
à In a variety of systems, the addition amount of micronized wax is generally between 0.5 to 3%.
à Usually by way of a direct high-speed stirring, it can disperse in solvent-based coatings and inks.
à It can be added by using a variety of grinding machines, and high-shear dispersing device. Must pay attention to the control of temperature.
à Can make a wax pulp with the wax concentration at 20-30% by pre-dispersing treatment, add it into the systems when needed, by which can reduce the dispersion time.
.Packaging and Storage
à Drum, net weight: 25kg / barrel.
à This product is non-dangerous goods. Please store it away from ignition sources and strong oxidants.
à Do not smoke while operating the micronized PTFE wax, avoiding the micronized wax to touch the cigarette-burns because it can produce some hat maybe inhaled.