| Alignment method | Precise core alignment and cladding alignment |
| Applicable fibers | Any common optical fibers.rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651~653,ITU-TG.655 and ITU-TG.657 |
| Optical fiber diameter | Cladding:80~150mm,coatinglayer:0.1~3mm |
| Cuttling length | 5-16mm (coated optical fiber diameter≤250μm);10mm(coated optical fiberdiameter:0.25~3mm) |
| Fusion splicing consumption (typical value) | 0.02dB(SMF);0.01dB(MMF);0.04dB(DSF);0.04dB(NZDSF) |
| Retum loss | Better than 60dB |
| Fusion splicing time(typical value ) | 7s |
| Heating time(typical value) | 18s |
| Pulling force test | 1.96~2.25N |
| Thermal shrinkagetube | 60mm,40mm and a series of thermal shrinkage tubes |
| Gracal display | High-performance 4.3 inch lcd |
| Magnification time | 320 times/88 times |
| Fusion splicing record | 10000 groups |
| Battery capacity | 11.1V,6800mAh,typical value offusion splicing and thermal cycle is 330 times |
| Battery servicelife | Cycle charging times reach 300-500,can be replaced by customers |
| Electrode servicelife | Typical value is 4000 times,can be replaced by customers |
| Construction lighting | Built-in lights with high-brightness and wide lighting area |
| Working environment | Temp:-10~50℃;hum:0~95%RH,height above sealeve1:0~6000m |
| Operation interfaces | GUI gracal operation interfaces |
| Extemal power | AC:AC100~240V,60Hz,0~1.5A,DC:DC10~15v |
| Extemal port | USB/SD |
| Dimensions | 120mm(W)×130mm(H)×154mm(D),(without rubber anti-vibration pad) |
| Weight | 1.59kg(host engine).0.37kg(battery) |
Signup today to claim your Discount. Get Started before it's too late!
