Heat exchanger part aluminum cooling fins turbulator

1. Product description In the study of heat transfer, fins are surfaces that extend from an object to increase the rate of heat transfer to or from the environment by increasing convection. The amount of conduction, convection, or radiation of an object determines the amount of heat it transfers. Increasing the temperature gradient between the object and the environment, increasing the convection heat transfer coefficient, or increasing the surface area of the object increases the heat transfer. Sometimes it is not feasible or economical to change the first two options. Thus, adding a fin to an object, increases the surface area and can sometimes be an economical solution to heat transfer problems.Because fins are used to improve heat transfer, it is important to allow open spaces toward optimization. In other words, the shape of fins must be optimized such that the heat transfer density is maximized when the space and the materials used for the finned surfaces are constraintsFins are most commonly used in heat exchanging devices such as radiators in cars, computer CPU heatsinks, and heat exchangers in power plants. They are also used in newer technology such as hydrogen fuel . Nature has also taken advantage of the nomena of fins. The ears of jackrabbits and fennec foxes act as fins to release heat from the blood that flows through them.2. Specification2.1. Material: Aluminum alloy like AA3003,AA1070,AA6061,etc are typical used;2.2. Temper for aluminum alloy: H14,H16,O are typical;2.3. Fins typePlain,serrated,perforated,wavy,louvered type is typical2.4. DimensionWidth up to 300mm; Thickness from 0.1mm to 0.5mm; Height up to 50mm; FPI from 6 to 12;3. Surface finishMill finish and cleaning4. Packing wayTo be packed in plywood case with protection film5. ApplicationTypically used as parts for heat exchanger