Helical anchors are used for new construction and to support existing structures. They are designed for applications in expansive soils, high water tables, fill areas, and other areas where unstable soils require a deep foundation. In compression they are used as footers and in tension they may be used to support retaining or foundation walls. Helical piers are round or square, tubular or bar steel shafts with round helix plates welded to them.
Â
Square Bar Shaft screw piles
1. Bar Material: 40Cr or 45# steel, round corner 5mm radius.
2. Helix Plate material conforms to ASTM A36 hot rolled plate .
3. Helices thickness are available in 3/8â and 1/2â inch.
4. All helix leading edges sharpened and rock cut and 45 degrees.
5. Corrosion protection to conform to ASTM A153 standard for hot dipped zinc coating.
6. A better conventional solid steel extra high strength helical screw pile
7. Welded coupling for greater strength. Eliminates shaft heat damage caused by upset coupling process.
Â
Specification | |||
Size | Lead Length | Helix Size(inch) | Extension length(ft) |
1-1/2â | 3ft/5ft/7ft | 8/10/12/14/ | 3ft/5ft/7ft/10ft |
1-3/4â | 3ft/5ft/7ft | 8/10/12/14/ | 3ft/5ft/7ft/10ft |
2â | 3ft/5ft/7ft/10ft | 8/10/12/15 | 3ft/5ft/7ft/10ft |
Other sizes are available upon request. |
Â
Â
Â
 Square Tubular Shaft  screw pilesÂ
1. Available in 2â, 2.5â, 3â or 4â square tube.
2. Helices thickness are available in 3/8âand 1/2âinch.
3. Helices material conforms to ASTM A36 hot rolled plate.
4. All helix leading edges sharpened and rock cut and 45 degrees.
5. Corrosion protection to conform to ASTM A153 standard for hot dipped zinc coating.
6. Square Tube eliminated over torquing concerns associated with pipe style helicals
7. Efficient torque transfer.
8. Clear visual indicator of torsional deflection.
Â
Specifications | ||||
Size | Tube Thickness(inch) | Lead Length(ft) | Helix Size(inch) | Extension Length(ft) |
2â | 5/16ââ | 3ft/5ft/7ft | 8/10/12/14 | 3ft/5ft/7ft/10ft |
2.5ââ | 5/16ââ or 3/8ââ | 3ft/5ft/7ft | 8/10/12/14 | 3ft/5ft/7ft/10ft |
3ââ | 5/16ââ or 3/8ââ | 3ft/5ft/7ft/10ft | 8/10/12/14 | 3ft/5ft/7ft/10ft |
4ââ | 5/16ââor3/8ââor7/16ââ | 3ft/5ft/7ft/10ft | 8/10/12/14 | 3ft/5ft/7ft/10ft |
Other sizes are available upon request. |
Â
Â
Round Shaft  screw piles
1. Shaft material: Seamless high tensile pipe, conforms to ASTM A500.
2. Helices material: ASTM A36 Hot rolled plate.
3. Corrosion protection conform to ASTM A153 standard for hot dipped zinc coating.
4. Round Shank Anchors are Hot Dip Galvanized to meet ASTM.
5. Leading edge of Helices beveled 45 degrees.
6. Greater Section Modulus Strength to resist Twisting and Deflection.
7. Greater Load Capacities.
Â
Specifications | |||||
Shaft Size(inch) | Wall Thick(inch) | Helix Thick(inch) | Lead Length(ft) | Helix Size(inch) | Extension Length(ft) |
2.875 OD. | 0.262 | 3/8 or 1/2 | 3ft/5ft/7ft/10ft | 8/10/12/14 | 3ft/5ft/7ft/10ft |
3.00 OD. | 0.238 | 3/8 or 1/2 | 3ft/5ft/7ft/10ft | 8/10/12/14 | 3ft/5ft/7ft/10ft |
3.50 OD | 0.254/0.300 | 3/8 or 1/2 | 3ft/5ft/7ft/10ft | 8/10/12/14 | 3ft/5ft/7ft/10ft |
4.50 OD | 0.290/0.337 | 3/8 or 1/2 | 5ft/7ft/10ft/12ft | 8/10/12/14 | 3ft/5ft/7ft/10ft |
5.50 OD | 0.362 | 3/8 or 1/2 | 5ft/7ft/10ft/12ft | 8/10/12/14 | 3ft/5ft/7ft/10ft |
6.625 OD | 0.562 | 3/8 or 1/2 | 5ft/7ft/10ft/12ft | 8/10/12/14 | 3ft/5ft/7ft/10ft |
Other sizes are available upon request. |
Â
Â
Â
Â
Other Applications1. Moorings & Bridges2. Communications & Transmission Towers3. Rail and highways4. Wind Power5. Oil & Gas Industries
Â
 Pakaging and Shipping:1. Packaging: Usually we shipping the products in 20ftâ container, or according to your demand.2. Shipping: 15-30 days after confirming your order
 Our service:
Â