Single to 3 phase converter for 7.5HP motor(7.5-10HP)

A. Detail information

Â

1. Capacity : 10HP

2. Current : 30A

3. Frequency : 50/60 Hz

4. Dimension(mm) : 99x183x120(WxHxD)

5. Mounting holes : 5Ø

Â

B. Features

Â

1. Drive 3 se motor with 1 se

2. The failure rate was even lower frequency operation

3. Exnt start-up torque

4. The size is small & easy to install

5. Semi-permanent life time

6. Energy saving effect

7. Stable in humid, dust, vibration and impact

8. 3 se motors can be used at your home

Â

* Features of 3 se motor

 Compared with 1 se Motor

 => Low failure rate, Small size, High efficiency, Affordable price

Â

C. Notices

Â

1. The product shall be used only 3 se 220v motor.

2. Use only a motor which suits the capacity range of this product.(1:1)

3. If the motor overheats, check whether the current is correct as shown on the motor nameplate.(Within 85% of rated)

4. When checking the D.P.S. voltage only, two se voltage are output, and three se voltage are output when the motor is running.

5. If you use a motor for a large load condition, use the D.P.S product with one rating higher. Do not use it with higher than one rating. (This may cause motor failure)

6. Motor brake must be of single se only.(A brake for 3 se does not work)

7. For control cables, use U.W cable only.(Electromagnetic switches, brake, magnet, etc.)

Â

D. Specifications

Â

1. Application range : 3 se 220v motor type

2. Rated voltage : 3 se 220v ±  10%

3. How to convert : Relay control circuit for three-se driving

4. Ambient temperature : -10 ~ 50°C

5. Enclosure : Open type(IP54)

6. Insulation resistance : 100MΩ or higher based on 500VDC MEGA

7. Withstanding voltage : Within 85% of motor rated current

Â

E. Application

Â

- All products driven by 3 se motors

- All motors for industrial and domestic purpose

- Hoists

- Compressors

- Conveyor motors

- Agitators

- Food processing machines

- Hydraulic motors

- Document cutter

- Meat slicers

- Agricultural machines

- Woodworking machines

- Portable air conditioners

- Machines for pumping

- Blowers

- Ceramics machines

- Fan motors

- Portable packaging machines

- Cutters, etc.

 * These products can be connected for use quickly and easily everywhere.

Â

F. Instances of D.P.S.

Â

- Conventional 1 se motors which have been used at home and abroad have problems that centrifugal force switch wear at start-up, fires occurs due to sparks, and production cost increases compared to 3 se motors.

Digital se converter is a device to supplement such problems in a perfect way, and had a compact size for easy installation, and a wide application in the machines requiring strong start-up torque. In addition, 3 se motors can be driven at your home.