| Sterilization | Autoclavable at 121 degree Celsius for 30 minutes. |
| Maximum operating | Temperature : 90 degree Celsius continuous |
| Maximum operating pressure | 7kg/cm2 |
| Biosafety | Passes Biological test for class-VI plastics as described in USP |
| Oxidizable matter | Passes as per USP |
| Extractables with DI-WATER | Within limits as specified in USP |
| Application | General purpose filtration of aqueous and non -aqueous solution where filtration volume is low |
| 1 | To remove particles from a samples, prior to analysis by HPLC. |
| 2 | Syringe filters are also available for the filtration of gases |
| 3 | Removal of bacteria from a sample. |
| Benefits | Solvent resistant PP mold |
| 1 | Color coded for easy identification |
| 2 | Extended LC column life |
| 3 | Luer lock inlet provides strong, leak –light syringe connection to withstand filtration pressure |
| 4 | Wide chemical compatibility |
| 5 | Faster flow rates |
| 6 | Very low extractable levels |
| 7 | Low hold up volumes |
| 8 | High heat resistance |
| 9 | Choice of selection for aqueous or non-aqueous solutions |
| 10 | With pre-filter membrane gives higher throughputs |
Description
Syringe Filters provide a very fast and efficient means of clarifying and preparing all types of small to mid-volume samples prior to analysis on the instrument. These are available with a wide range of membrane types like Nylon-66, Polyethersulfone, PVDF and PTFE membranes in pack of 100 as well as individually pre sterile packs. Syringe filters are primary choices for analytical sample filtration. Syringe filters are syringe-coupled filters. Choosing the correct type of filter device for your application allows you to speed up and simplify your filtration step.
Syringe filters are also available with combination of membrane and Microglassfiber. Microglassfiber acts as a Pre-filter and prevents the membrane from clogging .This combination is used for high particulate loaded samples.
Signup today to claim your Discount. Get Started before it's too late!
