QUARQ DZERO GXP CARBON CRANK

Quarq offers the DZero spider with SRAM Carbon Exogram crankarms. This is the choice you should go with when you want to run chainrings that mesh with conventional five-arm spiders.

Quarq found about 150 ways to improve their design, and employed them all in the spider. The big ways are the easiest to explain. In terms of use, they’ve added a Bluetooth low energy (BTLE) T+ t’s sending out both eously. This means both your and on-board bike computer can read the me time. The red LED that used to tell you that the meter was on has been replaced by one that is green or red, and it will tell you not only if the battery life is good, bad, or on life support, but also whether or not zeroing has worked or failed, and when the firmware is updating. Yes, you can upgrade the firmware, and do it for free, with the Qalvin app, which you can download onto most . The battery, a standard, user replaceable 2032 coin even with the dual nt, still lasts a lengthy 200 hours. And it’s super light at 578g for the 130mm BCD version.

What you can’t see and won’t necessarily notice the fact that the circuitry is revised and the strain gauges follow a new pattern, you should be happy they’ve done it. These features help with things like battery life and consistency. Yes, they still rate the accuracy as +/- 1.5%, it still measures both legs, it still has the 10k temperature compensation to take temperature variations out of the mix, and still doesn’t need a magnet affixed to the bike to turn on. You can still swap chainrings without needing to recalibrate-this is less about swapping rings for different terrain, though that’s still something you can do, and more about chainring replacement.

There are essentially four models. All four have crankarm lengths as short as 162.5mm and as long as 177.5mm. There are two basic variations, the 110mm BCD and 130mm BCD spiders. The shorter is for inner rings as small as 34t and outer rings as large as 52t. The taller is for 38t minimum inner and no max on the outer. Then, there are GXP and BB30 versions. GXP works with GXP bottom brackets as well as BB86, and any bottom bracket that fits a 24mm thru-axle. BB30 works with BB30, PF30, BBright, BB386EVO, BB30A, and PF30A.

The SRAM DZero Carbon Crank comes as a chassis only. You need to supply the bottom bracket, chainring bolts (steel, please), and the spider. The rings you put on will work with 10- and 11-speed drivetrains. This version opens up your choices as you can use traditional five-bolt chainrings, so long as they have the correct bolt circle diameter, from many companies.