Easy install flooring vinyl plank SPC vinyl wood flooring
SPC Flooring: What Exactly Is It?
From hotels and restaurants to schools, hospitals and more, there is no limit as to where you might find these planks installed. Moreover, with the introduction of rigid core technology, vinyl plank flooring looks to become more dynamic and versatile than ever thanks to products such as SPC. Here, we will discuss what SPC flooring is, how SPC flooring is made, the benefits of choosing SPC vinyl flooring, and a few SPC installation tips to consider.
SPC flooring advantage:
1)Waterproof and Dampproof As the main component of SPC is stone powder, so it performs well with water, and mildew will not happen with high humidity.2)Fire Retardant According to the authorities, 95% of the victims were burned in the fire caused by the nd gases. The fire rating of SPC flooring is NFPA CLASS B. Flame retardant, not spontaneous combustion, leave the flame automatic out in 5 seconds, won't produce ful gases.3)No Formaldehyde SPC is high quality stone power & PVC resin, without harmful material such as benzene, formaldehyde, heavy metal.4)No Heavy Metal, No Lead SaltThe Stabilizer of SPC is Calcium zinc, no lead salt heavy metal.5) Dimensionally Stable Exposed to 80° heat, 6 hours---Shrinkage ⤠0.1%; Curling ⤠0.2mm6) High Abrasion SPC flooring has a transparent wear-resisting layer, whose revolution is up and higher than 10000 turns.7) Superfine Anti-sliping SPC flooring has special skid resistance and wear-resisting layer of the floor. Compared with common floor,SPC flooring has higher friction when it's wet.8) Low requirement of subfloor Compared to traditional LVT, SPC flooring has a distinct advantage because it is rigid core, which can hide many imperfections of subfloor.
SPC flooring is generally comprised of the four following layers in mind:
MixingTo begin, a combination of raw materials is placed into a mixing machine. Once inside, the raw materials are heated up to 125 â 130 degrees Celsius in order to remove any water vapor inside the material. Once complete, the material is then cooled inside the mixing machine to prevent the occurrence of early plasticization or processing auxiliary decomposition.
ExtrusionMoving from the mixing machine, the raw material then goes through an extrusion process. Here, temperature control is crucial in order for the material to plasticize correctly. The material is ran through five zones, with the first two being the hottest (around 200 degrees Celsius) and slowly declining throughout the remaining three zones.
CalendaringOnce the material is fully plasticized into a mold, it is then time for the material to begin a process known as calendering. Here, a series of heated rollers are used to compound the mold into a continuous sheet. By manipulating the rolls, the width and thickness of the sheet can be controlled with precise accuracy and consistency. Once the desired thickness is reached, it is then embossed under heat and pressure. Engraved rollers apply the textured design onto the face of the product which can be a light âtickâ or a âdeepâ emboss. Once the texture is applied, the scratch and scuff Top Coat will be applied and sent to the drawer.
DrawerThe drawing machine, used with frequency control, is connected with a motor directly, which is a perfect match to the production d and is used to deliver the material to the cutter.
CutterHere, the material is crosscut to meet the correct guidedard. The cutter is nsitive and accurate toelectric switch to ensure clean and equal cuts.
Automatic Plate-Lifting MachineOnce the material has been cut, the automatic plate-lifting machine will lift and stack the final product into the packing area for pick-up.
Easy installationSPC can be easily installed in two ways, either with glue or with a loose-lay floor. Using newer loose-lay systems makes it possible to use SPC with minimal surface preparation. With this solution, flooring installation costs, as well as installation time, can be reduced.
WaterproofOne of the biggest benefits of choosing SPC vinyl flooring is that it is completely waterproof. Due to its rigid, PVC core layer, these planks can withstand liquids and spills unlike many of the flooring products that it mimics.
Style and ComfortSPC has a softer surface than other flooring materials such as wood or stone. It is also more comfortable underfoot and sound-reducing, which is a very important trait for many facilities.
Environmentally FriendlyChoosing SPC can help your facility earn LEED certification, as many of the materials used in its production are those of renewable products, recyclable content, and low-emitting materials.
BudgetWant flooring that is waterproof, scratch, stain a fade-resistant, yet wonât break the bank? Look no further. SPC vinyl flooring is generally less expensive than the luxury floors that it mimics such as hardwood or stone.
MaintenanceSPC never has to be sanded or sealed, making it much easier to maintain than other luxury floors. Since it is completely waterproof, just grab a damp mop and you are all set!
SPC flooring technical data:
Size | 1220 * 183mm; 1220 * 230mm; 1500 * 230mm; |
Thickness | 3.5 - 8mm (excluding mute pad) |
Underlayment | IXPE / EVA / cork |
Wear resistant layer | 0.15 - 0.5mm |
Brightness | Matte 5 - 7 degrees |
Texture | wood grain;stone grain;carpet pattern |
Color | thundreds of colors available |