High Thrust 2500N HVAC Valve Actuators Electric For Control Valve IP54
Valve size: DN65 to DN125
Thrust range: 1000-2500N
Technical Specifications
| Actuator model /td> | ZED24FP03-2500 |
| Function | Adjustment with feedback |
| Power supply | 24V AC/DC |
| Frequency | 50/60Hz |
| Power consumption | 7W for running, 1W for holding |
| Running speed | 0.2mm/s (adjustable) |
| Maximum thrust | 2500N |
| Maximum stroke | 65mm |
| Protection level | IP54 |
| Housing material | Flame retardant engineering plastics |
| Bracket material | Stainless steel |
| Base material | Stainless steel and power alloys |
Wiring Connection
Installation notes
Before any service work on the final controlling device is carried out, it is essential to isolate the electric actuator from the power supply (by unplugging the electrical cable if necessary). Any pumps in the part of the piping system concerned must also be switched off and the appropriate slide valves closed (allow all components to cool down first if necessary and always to reduce the system pressure to ambient pressure level).
The system must not be returned to service until the ball valve and the rotary actuator have been correctly reassembled in accordance with the instructions and the pipebeen refilled by professionally trained personnel.
Signup today to claim your Discount. Get Started before it's too late!
