Oil Filled Diffused Sillcon Pressure Transmitter Sensor For Water And Oil Test
19mm Silicon Piezoresistive Pressure SensorIntroduction of Pressure Transmitter Sensor:
Performance Parameters: | |||||
Range | Gauge(G) | 10KPa,20KPa,35KPa,100KPa,200KPa,350KPa,1000KPa,2000Kpa | |||
Absolute(A) | 100KPaA,200KPaA,350KPaA,700KPaA,1000KPaA,2000KPaA | ||||
Sealed(S) | 3500KPaS,7MPaS,10MPaS,20MPaS.40MPaS.60MPaS.100MPaS | ||||
Typ | Max | Unit | |||
Non | ±0.15 | ±0.3 | %F.S | ||
Repeatability | 0.05 | 0.1 | %F.S | ||
Hysteresis | 0.05 | 0.1 | %F.S | ||
Zero Output | 0±1 | 0±2 | mV | ||
Span Output | â¤20KPa | 50±10 | 50±30 | mV | |
â¥35kPa | 100±10 | 100±30 | mV | ||
Temperature Error-Zero | â¤20KPa | ±1 | ±2 | %F.S | |
â¥35kPa | ±0.5 | ±1 | %F.S | ||
Temperature Error-Span | â¤20KPa | ±1 | ±2 | %F.S | |
â¥35kPa | ±0.5 | ±1 | %F.S | ||
Compensated Temp. | â¤20KPa | 0~50 | ºC | ||
â¥35kPa | 0~70 | ºC | |||
Operating Temperature | -20~80 | ºC | |||
Storage Temperature | -40~125 | ºC | |||
Allowable Overload | Take the smaller value between 3 times the full scale or 120MPa | ||||
Burst Pressure | 5X the full scale | ||||
Long-term Stability | 0.2 % | F.S/Year | |||
Diaagm Material | 316L | ||||
Insulation Resistance | â¥200MΩ 100VDC | ||||
Vibration | No change under conditions of 10gRMS, 20Hz to 2000Hz | ||||
Shock | 100g,11ms | ||||
Response Time | â¤1ms | ||||
O-ring Seal | Nitrile ring or Fluoro ring | ||||
Filling Medium | Silicon Oil | ||||
Weight | ~ 28g | ||||
The parameters are tested under the following conditions: 1.5mA @ 25°C |
Outtruction | |
<3.5MPaS | |
â¥40MPaS |
Selection Examples |