Motorcycle 12V 6A Fully Intelligent Pulse Repair Charger LCD Display For

12V 6A Pulse Repair Smart Charger With LCD Display For Motorcycle Car Battery 12V AGM GEL WET Lead Acid Battery Charger EU Plug

Description• Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.• 3-stage chargers are suitable for most battery types including Calcium, Gel and AGM, Wet batteries. They may also help restore drained and sulted batteries.• Types of batteries: Most types of lead acid batteries including Calcium, GEL and AGM, Wet,EFB, etc..• Switchmode technology: Yes• Polarity protection: Yes• Output short protection: Yes• Non battery link protection: Yes• Over voltage protection: Yes• Over temperature protection: Yes• Cooling: Fan• Input voltage: 100-245V AC, 50-60Hz• Rated output: 12V 6A• Minimum start voltage: 2.0V• Battery range: 4-150Ah• Thermal protect: 65'C /-5'CCompliant standards: CB,CE, IEC60335, EN61000, EN55014Dimension (L×W×H): 152×80×60mmHow to Use1. Check your battery parameters is compatible to the charger (at the back of the charger).2. Connect the red clamp to the positive pole(+), black clamp to the negative pole.3. The LCD display will show battery voltage, charge current and inside temperature (Temperature is for reference only, allowed tolerance).4. Wrong battery connection: "EI-I-" will displayed on screen , the indicating lamp will flash.5. Connect the charger with AC power source, the charger will start to operate (the Charge-lamp will start to flash in red).6. Once the battery is fully charged, the battery bar on screen will in "FUL" status, meanwhile, the charge indicating lamp will keeps on. Keep the charged status in 1-2 hours is highly recommended.7. Charging completed, remove the charger.Remark: for 4Ah-15Ah battery, we suggest use "Repair" mode, because the battery size is too small, use pulse charge is very good for small size battery.Package Includes1 x Car Battery Charger