Workshop Assembly Line Working Table Drawer Lab Steel Anti Static Computer Repair Portable Workbench

Workshop Assembly ing Table Drawer Lab Steel Anti Static Computer Repair Portable Workbench

Chemical Modular Laboratory Worktable Description

A. Worktop: The worktop is based on the requirement of customers for lab bench such as nolic resin board, epoxy resin board or ceramic board. The edge of worktop will be treated specially to ensure its safety for human body.B. Cabinet: The cabinet is made of high quality 1.0/1.2mm cold rolled sheet with different thickness as per its different loading weight. The surface is treated by acid washing, srization before coating by epoxy resin powder. The cabinets can be opened with all blank space without middle support. The inside cabinet is equipped with adjustable setting for mobile layer. All the welding points have been polished specially which will not hurt the hand. The inside cabinet is with front and back upright columns and reinforcing ribs to increase the bearing capacity and impact resistance capacity. Every cabinet is equipped with 4 adjustable feets which is rust and moisture resistance for cabinets.C. Door and drawer: The door is with double layer made of 1.0 BAOGANG cold rolled sheet. We can fill the sound insulation material into the inside space between two layers if it's required by customer. The drawer is shaped once made of bending cold rolled sheets. It's with exnt bearing capacity for the support of drawer.D. Handle: integrated with the cabinet door /304# stainless steel C type handle / aluminum alloy concave short type handle (optional).E. Movable back panel: Movable and free dissembling structure which is convenient for checking water, electricity and gas pipe etc.F. Movable layer: It's with reinforcing rib inside to increase its bearing capacity to avoid deforming. It can be dissembled freely and the height can be adjusted.G. Hinge: Using durable 304 stainless exterior steel hinge with exnt weight capacity which is rust resistance and can be used for long time.

H. Front and rear girders: 30*60*1.5mm square steel tube is welded, and the surface is acid washed, stized and coated with 75um electrostatic powder of epoxy resin.I. Drawer sliding rail: Using 3-joints bearing drawer rail with noise reduction, it can ensure the full opening for the drawer with good bearing capacity and without deforming.J. Shelf: The shelf is made of steel frame and steel hanging pieces. The layer is made of toughened glass which is suitable to put all kinds of chemicals on it. There are multi-functional or other type of sockets on the column to satisfy the customers from different countries.K. Wall mounted cabinet: It's supported by column of reagent shelf which is with exnt weight capacity. The material is same as free standing cabinet.

Other equipments on the workbench:

Regent shelf: epoxy powder coating; The steel pipe of 60*30*2mm is adopted as the supporting column. Two layers of 12mm reinforced glass; Good bearing and solvent resistance. Stainless steel guardrails on both sides of the layer to protect the regency from falling.

PP, ceramic sink and faucet: acid and alkali resistant, perfectly integrated with the table.

Air valve: thick copper epoxy coating. Eye washer; Solid brass, epoxy powder coating.

Socket and aluminum tube; Suitable for various power supply systems and flexible location variations. Special socket for laboratory, international standard for all kinds of instruments and equipment.

Application

The laboratory wall bench is usually used in all kinds of laboratory, such as rmacy laboratory ,sical laboraotry ,cleanroom laboraotry ,university laboratory and so on.We are also specialized in the Laboratory Engineering.

Adavantages1. The worktop have the superior resistance to acids .alkalis,organic solvents.2. Resistant to high temperatures ,good scratch resietance ,never bending deformation.3. Easy to clean,sical properties.4. Loading capacity greater than equal 300 kg.

Q&A

Q1: Are You Manufactory or Trade Company?

We are the 100% Manufactory specialized in steel furniture over 8 years with 10,000 square meters workshop area and showroom. We have an exnt and experienced team.

Q2: How Many Days Will The Mass Production

The lead time for mass production based on your orders quantity, finishing, etc., usually 7-10 working days is enough.

Q3: Can We Have Our Logo or Company Information on Your Products or Package?

Sure. Your Logo can show on the products and package.

Picture of Chemical Modular Laboratory Worktable

Craft

Qualification

Package