Carbon Steel Y Strainer Anti-corrosive Fluorine-lined Gas Filter

Product description:The inter of the filter is fluorine, it is an indispensable device for conveying medium in piping system. It is usually installed at the inlet of the equipment to remove particulate Impurities In the medium, so as to protect the normal use for the valve or other equipment.1. Material: carbon steel, PTFE, WCB, F46, 35#2. Size: DN25~200mm3. Applicable medium: corrosive items4. Filter meshes: according to user, usually between 100-480 M/in²5. Working Pressure: 0.6~1.6 MPA6. Design temperature:-10ºC- +80ºC7. Connection: flange connection, 8. Features: the body is anti-corrosive, durable, easy to installation.Product Installation1. KMcan be installed horizontally or vertically, and the direction of the medium should be consistent with the arrowhead on the enclosure.2. For repairing easily, the product should be Installed and used with cutoff valves. Both upstream and downstream of the product should be installed withcutoff valves, and if the product needs the maintenance, the upstream and downstream valves can be closed to cut it off from the system.3. It is better to install differential pressure gauges in the upstream and downstream of the product. If there is a difference in the reading values of theupstream and downstream pressure gauges, it indicates that there are Impurities on the filter core. When the medium flows through the product, theliquid resistance is much greater than that in normal use. It is necessary to clean the filter mesh in time.4. In order not to influence the normal use of the system when the product is being repaired, a bypass pipe should be installed at the same time. And thestop valve on the bypass pipe Is closed In ordinary, while the valve Is opened when the product Is being repaired.

Maintenance:1. KMO recommends that after the product in use for a period, it is needed to remove the filter ing, so as not to be blocked by the filter impurities on the mesh, leading to increase the liquid resistance or affect the normal flow of the system. Generally, clean the filter in each 3 months or as the specified differential pressure, that is best;2. After cleaning the filter, install it back to the filter. Pay attention to observe whether the filter seal gasket has leakage or not. If it is leak, replace the seal gasket In time.3. The filter mesh should be cleaned in time after the product is installed in the new system, so as to prevent the waste left in the pipeng the installation of the pipe blocking the product.

FAQ:Q: Are you manufacture or trading company? A: We are manufacture and our factory is in in Oubei Town, Yongjia County, Wenzhou City, Zhejiang Province.Q: What is your products' MOQ?A: 10pcs.Q: Can you provide the sample for free?A: Yes, we can provide the sample for free, but you need bear the delivery cost.Q: If products have some quality problem, how would you deal with?A: We will responsible for all the quality problems.Q:Can we print our logo on your products?A: yes, just let me know if you need.