Chinese Manufacturer Car Automobile Exhaust Gas Analyzer

Automobile exhaust analyzer

Main Features:

Used to measure vehicle emissions of HC, CO, CO2, O2 and NOx gas concentration, automatic calculation shows that air-fuel ratio λ, can be the engine combustion performance and emissions of pollution in a comprehensive test. Use of advanced foreign technology, import the key components assembled. With a high-brightness digital display, automatic zero, tomatic data processing, auto-alarm when the gas king, fault diagnosis where the unit automatically and print testing date, time functions, with built-in printer (or the analog output interface or RS -232A digital serial communication interface), can be freely idling and dual idling measure, Multi-mode measurement,with convenient operation, accurate measurement data, work stable and reliable characteristics.

Main technical parameters:

Measuring range:HC: 0~10000×10-6(ppm)vol,CO: 0~10×10-2(%)vol )

CO2: 0~20×10-2(%)vol, O2: 0~25×10-2(%)vol

NOx: 0~5000×10-6(ppm)vol,

R.M.P: 0~9999r.m.p OIL TEMP:0~150℃

Lambda: 0.50~3.00 COcor:0~10×10-2(%)vol

Indicating error:HC±12×10-6(ppm)vol ( absolute error ) or±5% ( relative error )

CO±0.06×10-2(%)vol ( absolute error ) or±5% ( relative error )

CO2±0.5×10-2(%)vol ( absolute error ) or±5% ( relative error )

O2±0.1×10-2(%)vol ( absolute error ) or±5% ( relative error )

NOx±25×10-6

Stability:moment drift≤±3%

Repeatability ≤±2%

Resolution: HC:1×10-6(ppm)vol, CO: 0.01×10-2(%)vol,CO2: 0.1×10-2(%)vol,

O2: 0.01×10-2(%)vol, NOx: 1×10-6(ppm)vol, Lambda: 0.01,

R.P.M:10r.p.m, OIL TEMP:0.1℃

Response time:95% response is not more than 10 seconds

Preheating time: 8min ( preheating 3min emergency detection )

Output mode: digital direct reading, gases can be attached printer name, the maximum concentration, test time, date. Can interface with computer networking

And-use temperature: -5~50°C, Relative humidity:≤90%

Power: AC100~240V 50/60Hz or DC12V( Add power inverter)

Power consumption: 40VA

Dimension: 420 (L )×310(W)×170(H)mm

Weight: 9kg

Mainly packed by Carton box or other common security package, you also can give us your special requirments about it. We will try our best to make sure the goods arrive safely.

At present, we are dealing on laboratory equipment and medical analytical instruments, such as

biological safety cabinet, laminar flow clean bench, fume hood, refrigerator and freezer, incubator, oven, autoclave, freeze dryer, spectrotometer, centrifuge, Elisa reader and washer, Semi&Auto biochemistry analyzer, biochemistry reagents etc.

BIOBASE is a professional manufacturer of laboratory products from 1999. Our main products are Biosafety Cabinet (Class I/II/III), Laminar Flow Cabinet, Fume Hood, Biochemistry Analyzer, Reagent, Autoclave anf Incubator.

We have more than 800 employees and 2000 square meters production base, our output per year is amount to 10000 units. Pursuing the highst quality is the tenet if BIOBASE. We hope everybody will enjoy BIOBASE service to keep away from the infectious disease.

Our advantages: -We built an exnt research team which consists of 50 professional engineers -We have 14 years production experience and a strong technical production team, we adopt high-tech and state-of-the-art production equipments from Italy, Japan and Switzerland, tec. -We have a strong quality control team to inspect all production stage, from the purchased accesory to the finished products. -We have full sets of advanced quality assurance equipments We have ISO9001 quality management system; ISO14001 environmental managemnet system, ISO13485, CE mark, MET and NAF49 certificate. We got EN12469 certificate for Biosafety Cabinet in 2013.