Screw diameter (mm) | 65 |
Shot size (theoretical) (cm^3) | 929 |
Injection Weight (PS) (g) | 845 |
Dist. between tie bars (HxV) (mm) | 680 x 680 |
Machine dimension (l x w x h) | 7.01×1.7×2.25 |
Machine weight (t) | 13.2 |
Injection Unit | B |
Screw diameter (mm) | 65 |
Screw L/D ratio (L/D) | 20 |
Shot size (theoretical) (cm^3) | 929 |
Injection Weight (PS) (g) | 845 |
Injection rate (PS) (g/s) | 351 |
Injection pressure (MPa) | 182 |
Plasticizing rate (PS) (g/s) | 38.2 |
Screw speed (rpm) | 0-235 |
Clamping Unit | ã |
Clamping force (kN) | 3200 |
Mold opening stroke (mm) | 640 |
Dist. between tie bars (HxV) (mm) | 680Ã680 |
Mold height max(mm) | 680 |
Mold height min(mm) | 250 |
Ejector stroke (mm) | 160 |
Ejector force (kN) | 62 |
Others | ã |
Max.Pump Pressure | 16 |
Pump motor power (kW) | 37 |
Heater power (kW) | 22.95 |
Machine dimension (l x w x h) | 7.01Ã1.7Ã2.25 |
Machine weight (t) | 13.2 |
Hopper capacity (kg) | 50 |
Oil tank capacity (l) | 690 |