MATERIAL CATEGORY: High temperature martensitic high content chromium round bar and forge piece
MATERIAL SPECIFICATIONS: ASTM A565
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (WEIGHT %)
C (ï¼
): 0.20 ï½ 0.25Si (ï¼
): ⤠0.50Mn (ï¼
): 0.50 ï½ 1.00P (ï¼
)â¤: 0.025S (ï¼
)â¤: 0.015Cr (ï¼
): 11.0 ï½ 13.5Ni (ï¼
): 0.50 ï½ 1.00Mo (ï¼
): 0.90 ï½ 1.25W (ï¼
): 0.90 ï½ 1.25
V (%): 0.20 ï½ 0.30
Others (%): Cu ⤠0.50
MECHANICAL PROPERTIES / HEAT TREATMENT OR Q/T
Condition of heat treatment: Annealed Tensile strength, Ïb â¥/MPa: -Yield strength, Ï0.2 â¥/MPa:-
Elongation, δ â¥(ï¼
): -Reduction of area, Ñ â¥(ï¼
): -Hardness | HRS: â¤248
Condition of heat treatment: T, middle tempered Tensile strength, Ïb â¥/MPa: -Yield strength, Ï0.2 â¥/MPa:-
Elongation, δ â¥(ï¼
): -Reduction of area, Ñ â¥(ï¼
): -Hardness | HRS: â¤285
Condition of heat treatment: HT 1022â ~ 1050â air or oil cooled, â¥620â X 2H, tempered
Tensile strength, Ïb â¥/MPa: 965Yield strength, Ï0.2 â¥/MPa: 760
Elongation, δ â¥(ï¼
): 13.0Reduction of area, Ñ â¥(ï¼
): 30.0Hardness | HRS: 302 ~ 352
Condition of heat treatment: H 1022â ~ 1050â air or oil cooled, â¥677â X 2H, tempered
Tensile strength, Ïb â¥/MPa: 825Yield strength, Ï0.2 â¥/MPa: 585
Elongation, δ â¥(ï¼
): 17.0Reduction of area, Ñ â¥(ï¼
): 35.0Hardness | HRS: 241 ~ 285