Huatao Group - Corrugator Belt & Spare Parts
Web: (dot)htfont>
maple maple(at)
Tel 0583
Corrugator belts Inwoven Aramid Edge- Specification
Product | Corrugator Belt Inwoven Aramid Edge |
Thickness | 8mm-10mm |
Width range | 1000mm - 3200mm |
Length | 80 meters |
Heat-resistance | 240â (the kevlar edge upto 350â) |
Tensile strength | 70Mpa |
Coefficient of friction | ⥠0.40µ |
Weight per unit | (7.5±0.3)kg/㡠|
Air-permeability 40mm water Column | 2.0m³/㡠min |
Seam | Hot JAW lacing/Clipper with rubber coated |
Edge | 100mm or 200mm inwoven aramid edge reinforcement (kevlar) |
Suitable position | Top belt |
Lifetime | 50-70 million meter |
Used on all corrugators high tearing resistance Long life time running High abrasion resistance Moisture absorption Heat resistance Low noise |
Corrugator Belts with Silicone Coating Technical Parameters
Product | High Speed Corrugator Belt |
Thickness | 9mm |
Width range | 1400mm - 3200mm |
Length | 80 meters |
Heat-resistance | 240ºC (the kevlar edge upto 350ºC) |
Tensile strength | 70Mpa |
Coefficient of friction | ⥠0.40µ |
Weight per unit | (7.5±0.3)kg/m2 |
Air-permeability 40mm water Column | 2.0m³/m2/min |
Seam | Hot JAW lacing/Clipper with rubber coated |
Edge | 100mm -400mm inwoven aramid edge reinforcement (kevlar) |
Suitable position | Top belt,Bottom belt,Upper belt ,Lower belt |