1.Cylindrical Battery Capacity Analyzer mainly constitute by the computer system and control software, communication interface and battery detecting cabinet. Battery detecting cabinet comprises a fixture and placed the plate body of the fixture, charging, constant current and constant voltage source discharge constant current source, storage control circuit, current sampling circuit, voltage sampling circuit, the main control CPU, data memory, microcontroller programming and control panel.2. Each battery test station has independent constant current and constant voltage power.3. Using a unique constant current constant voltage power, constant current to constant voltage switch without impact, especially suitable for lithium ion battery charging and discharging requirements.4. Per device consists of a set of completely independent MCU control system.5. Specially used for chemical and capacity separation of cylindrical lopo battery.Customizable current range: 0-1 mA, 0-10 mA, 0-300 mA, 0-2 A, 0-3 A, 0-5 A, 0-20 A, 0-30 A, etc.Customizable voltage range: 0-5 V, 0-10 V, 0-20 V, 0-30 V, 0-50 V, 0-60 V, 0-150 V, 0-300 V, 0-500 V, etc.
Shenzhen TWSL Intelligent Equipment Co., Ltd.
For more details pls :
Jenny (Manager)
sales.jxcgroupï¼&#
It with XY axis servo drive machine, ball screw transmission Still, ensure accuracy can be equipped with MIYACHI solder
joint. MIYACHI series of spot welding power to ensure the reliability of the welding.Print-Rite power battery with
circulating water cooling system of spot welding welding, improve welding Connection effect, prolong the service life of
welding needle.
Features:
1 .equipment power: 4KW, 220V AC input, 50HZ;
2.the use of air pressure; 0.4-0.8Mpa;
3.the scope of adaptation: adaptation: 0, square (or similar) in series and parallel combination, realize
automatic single side spot welding;
4 .suitable for nickel sheet width; no limit;
5 .suitable for nickel film thickness; 0.1MM---0.4MM (0.2-0.4MM thickness of nickel film need to be slotted);
The test instrument can test the battery charge,discharge,short circuit protection,internal resistance,battery pressure drop,identification resistance,thermistor,capacity and so on,it takes only one second for the test
The main function features of the equipment
1.Each device can perform constant current and constant voltage charge and constant current discharge test on 512 batteries that meet the voltage range.
2.Using the constant current-constant voltage power supply of the invention patent, there is no impact from constant current to constant voltage switching, which is especially suitable for the requirements of lithium ion battery charging.
3.The device uses an AVR single-chip computer as the control center. With the external sampling circuit, it can be controlled by the superior computer. When connected to the computer, it can save the full charge and discharge curve of all channels, and can also be separated from the upper computer and complete the operation through the control panel. Constant current constant voltage charge, constant current discharge test, time sorting and other work.
4.Each battery fully has its own constant current and constant voltage source, and its own loop does not affect each other
5.Real-time detection of each battery voltage, charging, the first constant current charging, when the battery voltage reaches the set value, will be smoothly transferred to constant voltage charging, to meet the set time or current termination conditions, the charge is over. During constant current discharge, when the battery voltage is lower than the set value, the discharge is completed and the corresponding battery indicator lights up.
6.With the power-off protection function, the original work flow can be continued after the call.
7.The power tube uses 50N06, suitable for batteries that require lower discharge voltages, such as lithium iron ste batteries.8.The upper computer can set 32 process parameters and 256 cycles. Each host computer can connect 1 to 20 sets of single-chip microcomputer systems (10 sets or less are recommended).9.Supporting software features. 10.a) Using grac operation interface to display the data of each battery voltage, current, time, capacity, etc., and display the corresponding working status and abnormal conditions in various colors;1.b) Any segmented battery capacity indication (up to 100 segments);2.c) The data points can be recorded according to the voltage, current, and time variation conditions to form a complete charging and discharging curve data. The time interval of the curve data points is ≤ 4 seconds.1.d) multiple conditions (capacity, time, open circuit voltage, discharge platform, etc.) for battery sorting;1.e) automatically calculate the constant current charge ratio, capacity loss, discharge efficiency, average voltage, median voltage and other data;1. f) Operator authority settings, classification operations;2. g) can display charge and discharge curve diagram, cycle diagram;battery pack Jenny (Manager)Cel:
We provide all kind of lithium battery pack assembly machines and solutions with good quality and services.
Our products including:
1.IR tester
2.Capacity tester for cylindrical &prismatic&polymer
Signup today to claim your Discount. Get Started
before it's too late!
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
Ok
battery pack Jenny (Manager)Cel: 
