Shenzhen TWSL Intelligent Equipment Co., Ltd.
5V3A/6A Lithium Battery Analyzer Charge and Discharge Machine and Battery Capacity Tester for Cylindrical
Universal use 512 Channel 5V3A Cylindrical Battery Capacity Tester 18650 21700 battery Charge Discharge Analyzer Machine
Specification:The test instrument can test the battery charge,discharge,short circuit protection,internal resistance,battery pressure drop,identification resistance,thermistor,capacity and so on,it takes only one second for the test
The main function features of the equipment
1.Each device can perform constant current and constant voltage charge and constant current discharge test on 512 batteries that meet the voltage range.
2.Using the constant current-constant voltage power supply of the invention patent, there is no impact from constant current to constant voltage switching, which is especially suitable for the requirements of lithium ion battery charging.
3.The device uses an AVR single-chip computer as the control center. With the external sampling circuit, it can be controlled by the superior computer. When connected to the computer, it can save the full charge and discharge curve of all channels, and can also be separated from the upper computer and complete the operation through the control panel. Constant current constant voltage charge, constant current discharge test, time sorting and other work.
4.Each battery fully has its own constant current and constant voltage source, and its own loop does not affect each other
5.Real-time detection of each battery voltage, charging, the first constant current charging, when the battery voltage reaches the set value, will be smoothly transferred to constant voltage charging, to meet the set time or current termination conditions, the charge is over. During constant current discharge, when the battery voltage is lower than the set value, the discharge is completed and the corresponding battery indicator lights up.
6.With the power-off protection function, the original work flow can be continued after the call.
7.The power tube uses 50N06, suitable for batteries that require lower discharge voltages, such as lithium iron ste batteries.8.The upper computer can set 32 process parameters and 256 cycles. Each host computer can connect 1 to 20 sets of single-chip microcomputer systems (10 sets or less are recommended).9.Supporting software features. 10.a) Using grac operation interface to display the data of each battery voltage, current, time, capacity, etc., and display the corresponding working status and abnormal conditions in various colors;1.b) Any segmented battery capacity indication (up to 100 segments);2.c) The data points can be recorded according to the voltage, current, and time variation conditions to form a complete charging and discharging curve data. The time interval of the curve data points is ≤ 4 seconds.1.d) multiple conditions (capacity, time, open circuit voltage, discharge platform, etc.) for battery sorting;1.e) automatically calculate the constant current charge ratio, capacity loss, discharge efficiency, average voltage, median voltage and other data;1. f) Operator authority settings, classification operations;2. g) can display charge and discharge curve diagram, cycle diagram;battery pack Jenny (Manager)Cel:
Technical parameter
| of device channels | 512 channels (dual-screen control) |
| Constant current range | 0.015~5A, resolution 1mA |
| Current Measurement Accuracy | ±0.1%FS |
| Sampling current accuracy | ±0.1%FS |
| Voltage measurement range | 0~5V, resolution 1mV |
| Accuracy of voltage measurement | ±0.1%FS |
| Charge&discharge voltage range | Charging: 0~4.5V, Discharging: 4.5~2V (External wiring length cannot exceed 2.5 meters) |
| Constant voltage setting range | 3 ~4.5V |
| Constant pressure setting accuracy | ±0.1%FS |
| Time range | 0~30000 minutes/step, accuracy: ±0.1% |
| Cooling method | air cooling, upper air |
| Fixture form | Fixture |
| Working environment | Temperature: 0 ~ 40 °C, relative temperature ≤ 85% (no condensation of water vapor) |
| Dimensions | 1600mm (length)×550mm (width)×1840mm (high) |
| Working power | three-se four-C380V ± 15 %, 50HZ |
| Full load power consumption | ≤14KW |
TWSL-350 automatic labeling insulation paper
Product name
Sticker Label Machine
Input gas source
0.4-0.8Mpa
Function Style:
step motor with pneumatic
Input voltage:
AC220V
Sticker Matrials:
Barley paper or PVC
Sticker Matrials Size:
Barley paper Maxium 350mm;Scroll Internal Diameter 72-75MM
Adaptable Battery /span>
18650 battery Plus-n-Minus
Power:
Electric power or pneumatic
Control Instrument:
7.5feet screen,PLC programming machine and step motor
Electrodes to the body distance 100 mm (Scalable adjustable)
Producivity:
65pcs/min; singal 4pcs
External dimensions
1.3M*1M*1.3M
Features:
1 . Stickers pasted stable, consistent, and long lasting.
2. Automatic failure alarm.
3. Easy to program, adjust, and opertate for new hands.
4. High Efficiency, fully automatic, saving labour cost.
TWSL-50 Feature 1 ,Imported energy storage power, welding voltage lockout technology to prevent network pressure fluctuations in the welding current.2 ,Welding adjustable pulse width, small spatter, weld discoloration.3 ,Discharge of imported IGBT module, enabling single-pulse and double pulse with multi-pulse welding.4 ,Advanced technology: the continuous exchange with the international advanced inverter technology improvement and innovation. Dual pulse welding, welding and continuous pre-welding. Pre-solder oxide removal, remove debris, reducing the spark,, Continued solder joint cosmetics firm, no black, solder joints uniform size burr, does not affect the appearance of the product.5 ,Adjustment easy to use: solder pin spacing is adjustable, suitable for fine components welding, alignment accuracy, high yield.Scope: 1 ,This professional welder power battery (thick slices 0.5mm or less) welding design.2 ,18650 nickel belt suitable for welding, soldering connection battery, button welding, with guide he nickel-metal hydride batteries and lithium batteries, nickel plate aluminum alloy nickel composite tape, appliance parts and welding lbs foot welding, welding mobile power and battery. Welder MPU microcomputer control, pneumatically operated, small dimensions, with a protection circuit and alarm display, welding preheat wave, voltage fluctuation automatic compensation function to ensure stable energy output, high joint quality, easy maintenance, can improve the welding effectiveness. Suitable for high-volume production an>
TWSL-700
0 CNC Automatic Spot Welding Machine
Features:
1.For 18650 battery. Mobile power and other standardized production.
2.Simple operating system, 7.5-inch color touch screen, user-friendly design, easy to understand.
3.Control system: PLC programming control, with fault alarm system.
4.Cooling device comes with solder pin and prolong life.
5.X-axis and Y-axis ball screw design, the stepper motor driven.
Technical Parameters:
model: TWSL-700
Power supply : 220V,50HZ 3.6Kw
Use pressure : 0.3-0.8Mpa
Dimensions: L1300 * W750 * H1300MM
Machine weight : 200KG
X Module travel : 0-450MM ,maximum 22pcs 18650 batteries
Y Module travel : 0-200MM ,maximum 10pcs 18650 batteries
Productivity: 6 parallel and 16 series;5 parallel and 16 series, 4 parallel and 16series, 3 parallel and 16 series, around 33
batteries/min.
TWSL-800 0 Battery Automatic Numerical Control Welding Machine,
single panel & big size battery pack automatic spot welding machine
Function:
TWSL-800 is apower battery automatic spot welding machine, mainly for NB/Power- Tool/Gardening Tool/High Power/
energy storage battery / electric / electric motorcycle.
Automobile, such as the use of lithium battery pack, can be used as a part of lithium battery production an>
It with XY axis servo drive machine, ball screw transmission Still, ensure accuracy can be equipped with MIYACHI solder
joint. MIYACHI series of spot welding power to ensure the reliability of the welding.Print-Rite power battery with
circulating water cooling system of spot welding welding, improve welding Connection effect, prolong the service life of
welding needle.
Features:
1 .equipment power: 4KW, 220V AC input, 50HZ;
2.the use of air pressure; 0.4-0.8Mpa;
3.the scope of adaptation: adaptation: 0, square (or similar) in series and parallel combination, realize
automatic single side spot welding;
4 .suitable for nickel sheet width; no limit;
5 .suitable for nickel film thickness; 0.1MM---0.4MM (0.2-0.4MM thickness of nickel film need to be slotted);
6.production efficiency: 18650 32 pcs batteries/ min;
7.standard spot host: MB-30 spot machine;
8 .welding effect: Welding consistency is very good, uniform, beautiful, beautiful, pull more than 12KG;
9.control devices: 7.5 inch touch screen, 3 axis PLC programmer, 3 axis servo drive;
10.nickel belt with nickel strip, reduce waste;
11.equipment debugging is simple, easy to learn and easy to understand, fast changing model
welding effective area:X axis:900MM,maximum 45pcs 18650 batteries
Y axis 400MM,maximum 20pcs 18650 batteries
welding power: 50W servo motor and screw drive
14.equipment comes with fault alarm, according to the prompt to clear the fault
15.devices can store 99 programming data, easy to produce free transfer
Production process:
1.set up the parameters by group (0-99 group data) on the touch screen and save
You can change the type of automatic retrieval, press the reset button, enter the standby state after reset
2 put the nickel piece in the mold
3.according to the requirements of the electric core into the mold
4.put the mold into the welding machine
5.press the start button to finish the spot welding, and then automatically exit.
| Solutions for options:Option 1.Internal resistance(IRZ-200)+8 point capacity tester(TWSL-CT08/3A)+manual spot welding (TWSL-2118)+semi-finished testerOption 2.internal resistance(IRZ-200)+8 point capacity tester(TWSL-CT08/3A)+manual spot welding (TWSL-50)+semi-finished tester+30V/70V/100V aging cabinet(1 point) + PVC Shrinking Machine (TW-4020)Option 3.Internal resistance(IRZ-200)+8 point capacity tester(TWSL-CT08/3A)+five channel sorting(TWSL-500)+manual spot welding (TWSL-50)+semi-finished tester+30V/70V/100V aging cabinet(1 point) + PVC Shrinking Machine (TW-4020)Option 4.Internal resistance(IRZ-200)+8 point capacity tester(TWSL-CT08/3A)+insulation paster(TWSL-350)+6 channel sorting(TWSL-600)+manual spot welding (TWSL-50)+semi-finished tester+30V/70V/100V aging cabinet(6 point)+ PVC Shrinking Machine (TW-4020)Option 5. Internal resistance(IRZ-200)+512 point capacity tester(TWSL-CT512/3A)+insulation paster(TWSL-350)+10/11/13 channel sorting(TWS)+Automatic Both Side spot welding machine (TWSL-700/700L)+30V/70V/100V aging cabinet(14 point) + battery PACK tester (TWSL-6000) Option 6. Internal resistance(IRZ-200)+512 point capacity tester(TWSL-CT512/3A)+insulation paster(TWSL-350)+10/11/13 channel sorting(TWS)+CCD detection before welding (TWSL-CCD01) + Automatic Both Side spot welding machine (TWSL-700/700L)+70V aging cabinet(14 point) + battery PACK tester (TWSL-6000) |
We provide all kind of lithium battery pack assembly machines and solutions with good quality and services.
Our products including:
1.IR tester
2.Capacity tester for cylindrical &prismatic&polymer
3.BMS tester
4.Sorting machine for common use
5.Insulation paper sticker machine
6.Manual spot welding machine
7.Automatic spot welding machine
8.Battery pack integrated tester
9.Battery pack charging discharging aging machine battery pack charge discharge tester 10v,15v,20v,30v,60v,70v,100v,120v
capacity tester charge discharge tester 5v,3A/6A/10A/20A/30A/50A/60A/100A/200A
Bms tester 16 series 20s 24s 32s,48Series
battery pack function tester 100v 120A 200A
10.PVC shrinking machine
11. Nickel plate&PVC cutting machine
12.Laser welding machine
13.achine and etc.
Machines used in manufacturers of batteries for Power bank, Solar,laptops,E-Vehicles, E-Bikes,E-Tools,toy,Mobile ,Energy storage and etc.
All of our products are good price.
If you have any interesting,please with us
Our aitop machines for li-ion Batteries assemble are intelligent, simple to learn, easy to operate, with on ice.
One-year warranty and lifetime maintenance are our guarantee of quality .you can reach me by :
Shenzhen TWSL Intelligent Equipment Co., Ltd.
For more details pls :
Jenny (Manager)
sales.jxcgroupï¼&#
