Si: < 0.28% | Ash: 2-10% |
Resistivity: 55-90 uom | V.M.: 10-15 |
Compress Strength: >18mpa | Extensibility: 6-20 |
Apparent Density: >1.42g/cm3 | Fluidity Coefficient: 1..10-2.10 |
We pay much attention on mechanical developing and technology innovation.Now we have vibratory shaping equipment,synchronism shearing,press vacuum technic,high accuracy CNC machine tool,auto-batching system etc. Especially we apply inside heat type LW gratization technique,makes the grate product more homogenic,more gratized and more efficiency.
Electrode paste is a self-baking electrode used in submerged arc furnace for delivering power to the charge mix. Electrode Paste is added to the top of the electrode column in either cylindrical or briquette form. As the paste moves down the electrode column the temperature increase causes the paste to melt and subsequently bake forming a block of electrically conductive carbon. Electrode Paste is essentially a mix of Electrically Calcined Anthracite (ECA) or Calcined Petroleum Coke (CPC) with Coal Tar Pitch.
Now our products include:Â
electrode paste and recarburizers (including anthracite carburant, calcined petroleum coke carburant, grate recarburizer) are core products, and also produce pre-baked anode, anode scrap, carbon brick coal and petroleum coke.
Products have been exported to Pakistan, Malaysia, Russia, Oman, Egypt, Czech Republic, Slovenia, etc. approx 20 countries and regions.And are well commended both in domestic and abroad.
If you are looking for standard carbon electrode paste, pls consider our wide selection.Â
Carbon Electrode Paste Specifications
Si | <0.28% | Fe | <0.25 |
P | 0.004% | ||
Ash content | 2-10% | Resistivity | 55-90Â uom |
V.M | 10.-0-15.0 | Density | >1.46g/cm3 |
Compression Strength | >18Mpa | Extensibility | 6-20 |
Apparent Density | >1.42g/cm3 | Rupture Density | >4.0 |