7 segment led display specification of item KHN10801CSR1D-1
1) Type: 1 digit 7 segment led display super red 0.8" digit height, Common Cathode and Anode both available
Normal Red is about 30 mcd for brightness
Super Red is about 50 mcd for brightness
Ultra Red is about 70-80 mcd for brightness
2) Image of 0.8 inch 7 segment led display
3) 0.8" single digit 7 segment led display sizes and pins
4) 7 segment led display common anode circuit diagram
5) 0.8 inch 7 segment led display datasheet
Electrical and optical parameters:
Parameter | Symbol | Min | Type | Max | Unit | Test Condition |
Luminous Intensity | Iv | 50 | / | 70 | mcd | If =20mA |
Peak Wavelength | λP | / | / | / | nm | If =20mA |
Dominant Wavelength | λd | 629 | / | 635 | nm | If =20mA |
Forward Voltage | Vf | 1.8 | 2.0 | 2.5 | V | If =20mA |
Reverse Current | Ir | / | / | 50 | μA | Vr =5V |
Forward Current(suggested) | If | 3 | 5-10 | 20 | mA | / |
Absolute Maximum Ratings:
Parameter | Rating | Unit |
Reverse Voltage | 5 | V |
Power Dissipation | 50 | mW/chip |
Operation Temperature | -20 to +85 | °C |
Storage Temperature | -20 to +85 | °C |
Storage Humidity | 45%-85% | RH |
Soldering Temperature(Wave soldering) | 260°C in 3s, Iron soldering<360°C | |
Peak IF(mA)(1/10 duty cycle 0.1ms pulse width) | 80 | mA/chip |
Continuous Forwrd Current | 20 | mA/chip |
Similar products, 0.8 inch 7 segment led display
B. 7 segment led display common anode and common cathode
Common Cathode, all of the cathode(negative terminals) of the segment led are connected and brought out to a common pin.
Common Anode, all of the anode(positive terminals) of the segment led are connected and brought out to a common pin.
C. General 7 segment led display types