DM-S1211M 12kg low profile servo 42g/0.11s/12.6kg.cm metal gear digital servo

Features:

-Low Profile digital servo with metal gears 25T servo,2BB

-High torque motor,

-Waterproof

-Operating Voltage: 4.8V~7.4V

-Dead band width: 2usc

-Interface: (JR)

-5cm

Specifications:

Item No.:DM-S1211M

Weight:42g

Size:40.8*20.0*28.5mm

Speed:0.11sec/60degree 6V: 0.09sec/60degree 7.4v

Stall Torque:12.6 kg/cm 6V: 13.8 kg/cm 7.4V

Operating Voltage:4.8-7.4Volts

this is a high torque servo(in low profile servo),and the current will be 2-3A,so please check your power voltage and current before you use it,or it will not work well,

and you should not dispute on this if you don't check your power,thanks,

Futaba,JR,SANWA,Hitec compatible.

Specification:

Packing include :

1pcsXDM-S1211M servo

Accessaries:servo horns,rubber grommets, eyelets and mounting screws

Important Notes:

1,We offer JR plug for you,for it is compatible with Futaba plug.2,Please do read the instruction before you install the servo.Rubber grommet must be used to reduce vibration when you install the servo on GP airplane,GP car or GP boat.3,Please choose suitable servo for you rc model.Torque overload will damage your servo.4,Keep the servo clean and away from dust,corrosive gas and humid air.5,Please choose correct power voltage and make sure the current6,Specification are subject to change without notice