Product discription
The rotary evaporator is heated by water/oil bath to form thin film under the negative pressure condition, evaporate highly, then condense and recycle the solvent simultaneously. The apparatus are particularly suitable for the heat-sensitivity material’s condensation, crystallization, separation, solvent recovery and so on. And reflux extraction can be avaliable for parts evaporator models. It is one of the necessary basic instruments in the chemical industry, rmaceutical industry, universities and research laboratories and other units etc., while it is also the main means for concentrated extracts in producing and analysis experiments.
The rotary evaporator is the essence of domestic and foreign similar products, and sets our company successful practical experience. We have developed 10 liters, 20 liters, 50 liters large capacity rotary evaporator. And the equipment’s design follows efficient, practical, economic principles to meet customer's requirements maximally.
Features
1.Adopting international advanced EL gas-tight system can keep high vacuum degree. Gas-liquid separator, no reflux.
2. Host and vice highly effective double condenser, easy to install, good sealing, collection rate over 95%.
3. The rotating flask is connected by screw nut, easy to install and setup.
4. There is a discharge valve, fast to collect solvent.
5. Continuous feed are available. (Inlet Valve)
6. The vacuum system is installed vacuum meter, and can adjust best vacuum degree for low boiling point material.
7. Water bath intelligent temperature controller, and can be lifted up and down. Electric lifting can be customized according factual demands.
8. Reasonable structure, exquisite material. Mechanical parts are made of stainless steel and aluminum die casting. Glass parts are made of corrosion resistance, high temperature resistance, borosilicate glass. Rubber parts adopt new standard materials, easy to change for users.
9. Built-in transmission system, frequency conversion speed regulation, stable and reliable speed.
10. Explosion-proof system is optional.
Model | RE-201D | RE-301 | RE-501 | RE-5299 |
Evaporating Flask(L) | 1/24#(0.25-2L) | 3 | 5 | 1/24#(0.25-2L) |
Receiving Flask(L) | 0.25-1L/24# | 2 | 3 | 0.25-1L/24# |
Rotating Motor(W) | 40(Stepless speed regulation) | 30 | ||
Rotating Speed(R/min) | 0-120 | |||
Water(Oil) Bath Power (W) | 1200 | 1500 | ||
Temp Control Mode/Range | Intelligent digital/RT-399? | RT-99? | ||
Temp. Resolution | ±1? | |||
Evaporation Rate(L/H2O) | ≥1 | ≥1.5 | ≥1 | |
Max Vacuum Degree | 0.098Mpa | |||
Lifting Height(mm) | 0-150 | 0-120 | 0-150 | |
Water Bath Size | &;24*15 | &;26*15 | &;28*17 | &;24*15 |
Condenser | Vertical with charge pipe, large condenser, evaporating pipe | |||
Lifting Mode | Water/Oil Bath Manual Lifting | Screw Rod Manual Lifting | Automatic Lifting | |
Voltage (V/Hz) | 220V 50/60 | |||
Sealing Mode | PTFE, fluoro Rubber Sealing | |||
Note | Customized configuration is available. | |||
Optional Equipment
Signup today to claim your Discount. Get Started before it's too late!
