*Lots of options, with reservoir volume from 5L to 100L*All necessary accessories available (tubes, valves, cooling coils, etc)*Temperature up to 200C*Easy-to-operate controller panel*Large and bright LED display of temperature*Durable castors for easy transportation
How to use Laboratory Water Oil Baths?1.Before installing the equipment, it should be placed on some flat working area, First check appearance, the appearance should be no damage, electrical instrument appearance complete and no damage, no damage to the power cord, flexible power switch.2.Connect circulating tube with the reactor. (please connect the circulation tube before heating)3.Before the connect the power, first add to the tank some oil, preferable oil level is 5-8cm from the cover/lid. The choice of oil according to the requirement of different temperature: room temperature -150 ?: methyl silicone oil; 100-250 ?: nyl silicone oil; 200-300 ?: 350 # high-temperature heat transfer oil.
Technical Parameters | ||||||||
Model | GYY- 5L | GYY- 10L | GYY- 20L | GYY- 30L | GYY- 50L | GYY- 80L | GYY-100L | |
Function
| Liquid storage volume (L) | 5 | 10 | 20 | 30 | 50 | 80 | 100 |
No-load maximum temperature | 200? | |||||||
Heating power (kW) | 2.8 | 1.5 | 2 | 2.8 | 2.8 | 3 | ||
Cycling performance
| Power | 220V/50HZ 380V/50HZ(50L/80L) | ||||||
Pressure | 1.45Mpa | |||||||
Cycle way | Sealed magnetic pump cycles | |||||||
Flow rate(L/min) | 15-20 | 20-25 | ||||||
Temp control performance
| Temp control range (?) | Water bath: RT~99; Oil bath: RT~250 | ||||||
Temperature error | ≤2.50% | |||||||
Working condition
| Humidity | 60% | ||||||
HTF viscosity | Below 500C?·S·t | |||||||
Currents(A) | 10 | |||||||
Optional Configuration | Explosion-proof motors and electrical | |||||||
The of heating tube | 1 | 2 | 3 |
***Click Here for More Details***
Application in jacketed glass reactor:
***Click Here for More Details***