Cone Calorimeter

CONE CALORIMETER

What is it?

A cone calorimeter is a device used to measure the thermal behavior of small samples of materials in their condensed se. Its extensive use is in fire safety engineering, where it is employed to study how different materials burn. The calorimeter can measure the heat release rate, smoke generation rate, ignition time, oxygen consumption status, carbon monoxide, carbon dioxide generation, and mass loss rate of the given material sample.

A cone calorimeter is a scientific instrument used to measure the heat release rate and smoke production of materials when they are exposed to an external heat source. This information is valuable for evaluating the fire performance of materials and products, and for developing fire safety standards and codes.

The cone calorimeter consists of a small, sealed chamber with a cone-shaped opening at the top. A sample of the material to be tested is placed in the chamber, and an external heat source is applied to the material through the cone-shaped opening. The heat release rate and smoke production of the material are measured using sensors within the chamber.

Heat release rate is a measure of the rate at which a material releases heat as it burns. It is typically expressed in kW/m2, and is an important factor in determining the fire hazard of a material. The higher the heat release rate, the more quickly a fire can spread and the more intense it will become.

Smoke production is another important factor in fire safety. Smoke can obscure visibility and make it difficult for people to escape a burning building. The smoke production of a material is typically measured in terms of the amount of smoke produced per unit area of the material, and is expressed in m2/m2.

Cone calorimeters are widely used in the construction, transportation, and aerospace industries to evaluate the fire performance of materials and products. They are also used by fire safety researchers to study the mechanisms of fire spread and to develop new fire safety technologies.

In addition to measuring heat release rate and smoke production, cone calorimeters can also be used to measure other fire performance characteristics, such as the ignition temperature of a material and the amount of roduced during combustion.

The use of cone calorimeters has greatly improved our understanding of the fire behavior of materials and has led to the development of more effective fire safety measures. For example, the results of cone calorimeter testing have been used to develop fire resistance ratings for building materials, which are used to evaluate the fire safety of buildings.

Cone calorimeter testing is typically conducted in accordance with standardized test methods, such as the ISO 5660 and ASTM E1354 standards. These standards specify the apparatus, heat source, and test conditions to be used in the testing of materials.

The results of cone calorimeter testing can be used to compare the fire performance of different materials and to predict the fire behavior of materials under different conditions. For example, the results of cone calorimeter testing can be used to compare the fire performance of different types of insulation materials or to predict the fire behavior of a material when it is used in a particular application, such as in the walls of a building or as a component of an aircraft.

Â

The Principle of Cone Calorimeter

Â

Numerous test procedures are available to assess a material's capacity to respond to fire, including the Small Flame Source Test (ISO 11925-2), the Oxygen Index (LOI) Test (ISO 4589-2, ASTM D2863), the Horizontal and Vertical Flammability Test (UL 94), and the NBS Smoke Density Test (ISO 5659-2, ASTM E662).

They generally include small-scale testing of a single material property, only evaluating its performance in a controlled environment. It cannot be used to predict how a material will behave in a big fire.

Many nations, areas, and international standards organizations have employed the cone calorimeter, one of the most effective fire test tools, to study the combustion characteristics of materials in construction materials, plastics, composite materials, wood products, and cables.

Â

Heat Release

Â

According to the concept of heat release, 13.1 MJ of heat is produced per kilogram of oxygen consumed, and the net heat of combustion is proportional to the amount of oxygen required for burning. The test involves:

·   Burning samples under ambient air conditions.

·   Detecting the oxygen contents and exhaust gas flow rates.

·   Exposing them to an external irradiance between 0 and 100 kW/m2.

Â

Smoke Release

Â

The basis for measuring smoke is the law that states that light intensity decreases exponentially with distance when it passes through a volume of combustion products. The percentage of laser light intensity that passes via smoke in an outlet pipe is used to calculate smoke obscuration.

According to Bouguer's law, this proportion determines the extinction coefficient. In the test, samples are burned in ambient air while exposed to external irradiation ranging from 0 to 100 kW/m2, measuring smoke obscuration and emission gas flow rate.

Â

Mass Loss

Â

The test specimens are burnt above the weighing instrument while exposed to external irradiation between 0 and 100 kW/m2, and the mass loss rate is measured.

Â

The Cone Calorimeter Applications

Â

·   Analysis of Material Combustion Properties

Â

Analyze the combustion risks of various materials based on the results of the cone calorimeter test (e.g., HRR, Peak HRR, TTI, SPR, etc.) and choose the right ones to utilize for various applications.

Â

·   Study of Flame Retardant Devices

Â

The structure of materials can be modified to produce materials with superior flame retardant qualities by repeated testing and test data comparison.

Â

·   Fire Model Study

Â

Create several fire model types by looking at the heat release rate, smoke release rate from burning materials, trend analysis, or connecting to a medium-scale test model (ISO 9705).

Â

Testing Procedure Of Cone Calorimeter:

All the devices which were used before the invention of this device were also known to be faulty, and they had many types of experimental errors. However, there were radical changes in the design that made the device's operation reliable. A cone calorimeter is considered one of the essential devices for fire protection engineering and fire testing. This device encases a sample in Aluminium foil, a retainer frame and wool. A conical heater is also placed for the materials to combust, and the heating a radiant flux that turns electricity into heat. The heater of this instrument is also open in the centre and allows the combustion products to flow upwards.

Â

The most important part of the device is ventilation. A small water supply is also essential to cool and regulate the heat in the device's system. The combustion products travel through the cone heater and the instrumented exhaust pipe. The values which are calculated are not limited to the mass-loss rate during the process of combustion and the total amount of heat which is released during the test.

Several smoke production in this device and the room fire test have been analyzed, and all the good correlations have also been obtained when the products are divided into two groups-

Â

• The products with more than ten minutes to flashover in the room fire test.
• The products with less than ten minutes.

These are the two categories which correspond to the two heat output levels in the room fire test. They are taken as 100kW for the first ten minutes and 300kW up to 20 minutes. The average rate of smoke production and the total smoke production for the products with more than 10 minutes to flashover are the useful parameters for the prediction of smoke release in the fire test.Â

Â

However, on the other hand, the products with less than ten minutes, no parameter seems to be give any type of useful prediction.Â

Â

It is a known fact that the products which release large amount of smoke tend to have a short time to flashover in the fire test. Hence, in this case, one should consider the smoke production in a classification system.