AMU-020 light curing glass insulation coating

product description:

AMU-020 glass insulation coating is a coating that can only be cured under ultraviolet light (UV) irradiation with a certain amount of to-excitation energy. In other cases, it will not cure. Therefore, the coating is mainly used in a glass production n mass-produced energy-saving insulating glass, or in an environmental condition requiring a coating to be quickly dried. The various sical and chemical indexes of the paint are similar to those of AMS-020. The film has high hardness, good energy saving effect, environmental protection, flame retardant, noise isolation, convenient construction and easy promotion.

Main performance parameters:

Indicator name

Performance parameter

Exterior

Blue liquid (single component)

Main ingredient

GTO nano-insulation medium

Infrared rejection rate

≥90%

value

6.5±0.5

proportion

0.845 g/cm3

Visible light transmittance

≥85%

UV blocking rate

≥99%

hardness

4-5H

Adhesion

Level 0

Noise reduction

15-20 decibels

Coating thickness

3-4μm

Membrane life

20 years

Construction area

40-50m2/L

Application areas:

1. A factory for producing various energy-saving glass.

2. It is used to produce energy-saving glass for various architectural glass, solar glass, glass curtain wall, high-grade hotels, hotels, office buildings, private houses, exhibition halls and other fields.

3. Energy-saving glass production producing various vehicles, trains, airplanes, ships and other means of transportation.

 Instructions:

1. The glass to be constructed should be cleaned before construction, and the surface should be dry and free of moisture before construction.

2, can be used sponge scraping, coating, spraying, coating machine pment.

3, first use low temperature drying, and then use the ultraviolet light equipment with 3,600 joules of light excitation to cure for 20-25 seconds (or 5.6-9.6KW UV lamp).

 Precautions:

1. Selection of construction surface:

Single-layer glass: both indoor and outdoor.

Double glazing should be chosen for outdoor construction.

2, can be applied to the substrate:

Transparent glass, transparent acrylic, transparent PET, transparent PP

Packing specification

1/2/20 liter