SGS Laminate Floor Underlay Natural 2mm Rubber Underlayment With Silver Film

2mm Natural Rubber Underlayment For Laminate Flooring With Silver Film Acoustic

Introduction:

This underlay is denser than the basic foam underlay and its acoustic properties are much higher. It is Manufactured from natural rubber, equipped with an integral fleece and an ALU vapour retardant. Due to the high density of this material, it is especially suited for frequently-used rooms and elsewhere in the building. This underlay will also improve the feel and sound when walking on your floor. This underlay is also suitable where low-temperature underfloor heating <45 Degrees Celsius.

Rubber underlay is made exclusively for floorsave, with a high density, natural rubber and has an integrated backing fleece as well as an aluminium foil vapour barrier. it has exnt heavy mass stability and provides high impact sound insulation whilst also reducing airborne noise.

Feature:

High quality acoustic underlayThermal insulator2mm thick rubber with silver barrier film and backing fleeceExceptional resistance to compressionsQuick & Easy to installRoll size: 1m x 10m

How to Install

Step 1: Clean Your SubfloorClean your subfloor using your broom and dustpan so that it is free of any foreign objects.

Step 2: Roll Out Your UnderlaymentRoll your underlayment next to the wall. Start in the corner to keep it as even as possible across the room.

Step 3: Cut the SectionOnce you have your underlayment firmly in place, cut the section using your scissors or utility knife.

Step 4: Roll Out the Next SectionRoll out the next section with the tape side over the overlapping film on the previous section.

Step 5: Butt UnderlaymentButt your underlayment sections together so that the tape side is flush up against the other piece of underlayment and on top of the overlapping film.

Step 6: Cut SectionCut the next section of underlayment.