Medium and low consistency cleaner for paper pulp

The medium-consistency cleaner is advanced equipment for pulp purification, especially for the purification of waste paper pulp, and it is one of the indispensable equipment for waste paper recycling. The equipment adopts the "snail" type of slurry feeding, which fully solves the disadvantages of the slag remover's slurry inlet jet interfering with the slag removal slurry flow, ensuring a good slag removal effect and reducing pressure loss. The medium-consistency cleaner has a wide range of applications. It can be used for the rough separation and purification of high-concentration pulp, and it can also be used for the selective purification of low-concentration pulp before the paper machine.

Advantage

1.Flexible structural design: Each slag remover is composed of an inlet part, a wear-resistant cone, a tailings discharge cone, and a secondary separation chamber, making it easier to disassemble and assemble.

2.Low power consumption: The unique structure design can make the slurry enter the slag remover at any concentration of 0.4-2.0%. The inlet pressure only needs 0.2Mpa to form a stable vortex, which greatly reduces system power consumption and operation and maintenance costs.

3.Service life: The main body of leizhang Cleaner is made of wear-resistant stainless steel. The wear resistance and corrosion resistance of the slag remover are increased, and the application range is wider; the slag discharge cone is ceramic to ensure the service life.

4.Secondary fiber separation device: The slag remover adopts a unique secondary fiber separation device, which can minimize fiber loss. The separation chamber is designed with wear-resistant transparent material, which can easily observe the operation.

5.End-stage fiber recovery device: The tail slurry of the last stage of the Yunfeng cleaner system directly enters the dedicated fiber recovery device without power consumption.

6.Flexible use characteristics: The slag remover can be used alone or several in series, and can also be placed at the end of other heavy slag removers as a fiber recovery device for independent use.

7.Structure and Principle

8.The medium and low consistency cleaner slurry enters the cone along the spiral tangent quickly forms a stable vortex. The good slurry is separated from the upper part. After the tail slurry enters the bottom discharge tank, the unique balanced water design makes the tail slurry separate in the second time The room is separated twice. The fiber is collected from the center of the secondary separation chamber, and the tailings are discharged from the slag outlet at the bottom of the separation chamber, thereby greatly reducing fiber loss. It can be widely used in various slurry purification systems to remove sand, iron filings, dust and other small and heavy impurities in the slurry.