Properties of grades and application recommended.
Grade |
Density (g/cm3) | Hardness (HRA) | TRS (MPa) |
K10/YG6X | 14.95 | 91.5 | 1800 |
K20/YG6 | 14.95 | 90.5 | 1900 |
P10/YT15 | 11.4 | 91.5 | 1600 |
P20/YT14 | 11.6 | 90.8 | 1700 |
P30/YT5 | 12.9 | 90.5 | 2200 |
M10/ YW1 | 13.10 | 91.6 | 1600 |
M20/ YW2 | 13.00 | 90.6 | 1800 |
Application recommended
Grade | Applications recommended |
K10/YG6X | The finishing & semi-finishing of cast iron and nonferrous metals and also for the machining of manganese steel and hardening steel. |
K20/YG6 | Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
P10/YT15 | Suitable for the finishing and semi-finishing for steel and cast steel with a moderate feed rate and rather high cutting speed. |
P20/YT14 | Suitable for the finishing and semi-finishing of steel and cast steel. |
P30/YT5 | Suitable for the heavy duty rough turning of and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions. |
M10/ YW1 | Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel. |
M20/ YW2 | The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the machining of railway wheel hubs. |
Signup today to claim your Discount. Get Started before it's too late!
