Input Power | |
Main uency (nominal) | 50-60 Hz |
Input Voltage (nominal) | 100-240 VAC |
Input Current(rms) | 2A |
Operating Parameters | |
Ambient Temperature Range | 15 â 30 degrees C[59 â 86 degrees F] |
Relative Humidity | 30% to 80%, non-condensing |
Atmosric Pressure | 90-110 kPa |
Warm-up Time | If transported or stored at room temperatures outside the operating temperature range, allow one hour for the device to reach room temperature before use. |
Transport and Storage | |
Ambient Temperature Range | -20 â 65 degrees C[-4 â 149 degrees F] |
Relative Humidity | 0% to 80%, non-condensing |
Atmosric Pressure | 50 to 110 kPa |
Dimensions | |
System | 35cm W x 35cm D x 100cm H [18.2â³ W x 18.2â³ D x 40â³ H] |
Handpiece cable | 250 CM L [100â³ L] |
Weight | |
System | 35cm W x 35cm D x 100cm H [18.2â³ W x 18.2â³ D x 40â³ H] |
FormaV Applicator | 0.22 Kg [0.5 lbs.] |
FractoraV Applicator | 0.22 Kg [0.55 lbs.] |
RF Maximum Output energy | 40[energy levels] |
RF Frequency | 1[MHz] + or â 2% |
FormaV Vaginal Treatment Zone | 10-20 cm2 |
RF Energy Level | 20-30 |
Cut-Off Temperature | As High as Tolerable Starting at 40 Degrees Celsius |
Gel | Thick Layer |
Additional âAdd-Onâ Applicator Available | |
FRACTORA | |
24 Pin | Type â Full Thickness Dermal; Configuration â 6Ã4; Pin Length â 3000u; Ablation Depth â 3 mm; Heating Depth â Between 3-5 mm; Max Output Energy 62 mj/pin; Output Frequency â 1 MHz; Repetition Rate â Up to 2 pps |
24 Pin Coated | Type â Deep and Subdermal; Configuration â 6 x 4 Coated; Pin Length â 3000 u, Ablation Depth â 3 plus mm; Heating Depth â Between 3-5 mm; Max Output Energy 62 mj/pin; Output Frequency â 1 MHz; Repetition Rate â Up to 2 pps |
60 Pin | Type â Mid Dermal; Configuration â 10Ã6; Pin Length â 600u; Ablation Depth â 0.6-1 mm; Heating Depth â Between 3-5mm; Max Output Energy 62 mj/pin; Output Frequency â 1 MHz; Repetition Rate â Up to 2 pps |