| Black | Gray |
About this item
Autel AL329: Upgrade from Autel Al319 Comparing to AL319, AL329 features Auto-VIN function, save you the time to manualy input vehicle info before diagnose. This feature is new added and normally can only be available on higher model such as AL519 and above. Please also know that AutoVIN function is not universally compatible for all vehicles.
One-Click Smog Check & I/M Readiness Test I/M Readiness is used to check the operations of the Emission System on OBD II compliant vehicles, easy-to-read AVOmeter to test voltage, continuity, and current at the fingertip, able to test 12V generator, starter and condition of the discharged battery, memory/battery backup for data review and data printing via PC for further analysis. With AL329, All can be done with one click prior to having a vehicle inspected for state emission compliance.
Freeze Frame Data & Live Data Autel OBD2 scanner AL329 allows the technician to view the vehicle’s operating parameters like RPM, fuel pressure, fuel trim, engine coolant temperature, etc at the moment a DTC (Diagnostic Trouble Code) is detected. It also can be used to view live or real time PID data of vehicle’s engine modules. Autolink AL329 can retrieve Vehicle Information such as VIN Calibration ID(s), Calibration Verification Nos. (CVNs), etc.
Read Codes & Clear Codes Autel Autolink Al329 is able to read BD2-compliant vehicle DTCs in seconds to pinpoint emission-related issues. Next step, Al329 can help you delete not only the codes from the vehicle’s on-board computer, but also “Freeze Frame†data and manufacturer-specific enhanced data. Further, the I/M Readiness Monitor Status for all vehicle monitors is reset to Not Ready or Not Complete status.
On-Screen DTC Definition Autel AL329 OBD2 code reader is able to retrieves generic (P0, P2, P3 and U0), manufacturer-specific (P1, P3 and U1) and pending codes, and display meanings under the trouble codes based on the built-in database(more than 3000 codes), saving you the time searching on the internet. AL329 is suitable to serve as portable daily tool for every drivers.
100% Original & Official Warranty This Autel AL329 is directly from Autel factory and backed with 12 months official warranty,
Autel Autolink AL329: Upgrade Version of Autel AL319 OBD2 Scanner !
As a ultra portable OBD2 code reader, Autel AL329 offer you a bunch of great functions at a meager budget, making it the best companion for every drivers. With Autolink AL329, you can conveniently diagnose the engine system of your vehicle, offering concise on-screen DTC description to let know what to fix decide whether fix it by yourself or ask for help from technicians.
Product Features：
Compatible with American, Asian and European vehicles, 1996 and newer
Retrieves generic (P0, P2, P3 and U0), manufacturer-specific (P1, P3 and U1) and pending codes
Reads and displays I/M monitor (Emissions) status
Views Freeze Frame Data
On-Screen DTC Definition
Retrieves vehicle identification information (VIN, CALID and CVN)
Clears codes, resets monitors and turns off malfunction indicator light (MIL)
Easy plug-in and scan operation
Autel AL329 Car Code Reader: Patented One-Key I/M Readiness Checking !
This function an be used as a convenient readiness test tool by automotive technicians to determine if the tested vehicle is ready for an emission test. By visual and audible indication of this Autel AL329, you will learn a vehicle’s emissions readiness status and don’t have to drive around endlessly, continuously coming back to the repair shop for retest to check if all required tests by the ECU are completed. And you could also do a quick check of the vehicle to determine if it is ready to receive an emission test without the hassle of connecting your vehicle to the analyzer or having to use a complicated scan tool.
As Pre-Check Diagnostic Tool
Prior to having a vehicle inspected for state emissions compliance, use this function to check the readiness status.
(1) While the scan tool connected to the vehicle, select Ready Test from Main Screen. Drive the car till the scan tool notifies you safely with color LEDs and audible tone if your vehicle is ready to conduct state emission test.
(2) If the GREEN LED lights and two long beeps are heard, your vehicle is ready and it should pass emissions testing.
(3) If the RED LED lights, your vehicle is not ready and must be repaired before an emission test can be performed.
LED and Tone Interpretation
OK– indicates that a particular monitor being checked has completed its diagnostic testing; INC– indicates that a particular monitor being checked has not completed its diagnostic testing; N/A – the monitor is not supported on the vehicle.
Autel Autolink AL329: On-Screen DTCs Definition
The Autel AL329 support Read Codes function that can be performed with the key on, engine off (KOEO) or with the key on, engine running (KOER). if there is any fault was found, Al329 allows you to view DTCs and their definitions on screen.
Read Codes:
Supporting multiple trouble code requests: generic codes, pending codes and manufacturer specific codes. Match the retrieved DTC(S) with those listed on the Manual and read the definitions, more than 8000 DTC definitions can be found on the official website
Erase Codes:
1. Erasing the Diagnostic Trouble Codes may allow the scan tool to delete not only the codes from the vehicle’s on-board computer, but also “Freeze Frame†data and manufacturer-specific enhanced data. Further, the I/M Readiness Monitor Status for all vehicle monitors is reset to Not Ready or Not Complete status. Do not erase the codes before repairs or services have been performed.
2. Even if deleted, codes will again display if the underlining fault causing the code is not addressed.
Live Data:
Allows viewing of the vehicle’s operating parameters like RPM, fuel pressure, fuel trim, engine coolant temperature, etc at the moment a DTC (Diagnostic Trouble Code) is detected. It also can be used to view live or real time PID data of vehicle’s engine modules.
Freeze Frame Data:
Freeze Frame Data allows the technician to view the vehicle’s operating parameters at the moment a DTC (Diagnostic Trouble Code) is detected. For example, the parameters may include engine speed (RPM), engine coolant temperature (ECT), or vehicle speed sensor (VSS). This information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
Autel AL329 AutoVIN Functions: New Added function Comparing to Autel AL319 !
Comparing to Autel AL319, AL329 features Auto-VIN function, save you the time to manualy input vehicle info before diagnose. This feature is new added and normally can only be available on higher model such as AL519 and above. This function enables retrieval of Vehicle Identification No. (VIN), Calibration ID No. (CINs), Calibration Verification No. (CVNs) and In-use Performance Tracking on 2000 and newer vehicles that support Mode 9.
You can figure out the tested car or whether the vehicle has been repaired or not with the Auto VIN procedure. Moreover, this outstanding aspect helps you to retrieve the previous history of the vehicle. You can keep yourself up to date and smart with the help of this marvelous feature.
Note: Please also know that AutoVIN function is not universally compatible for all vehicles.
Autel AL329: Super Comapct & User-friendly Design !
With a TFT color display of 220×176 dpi, connectivity of USB mini 2.0 OBD II DB16, and operating temperature of 0 to 60C (32 to 140F), you can experience exnt services by using the incredible device. The Autel AL329 OBD2 scanner tool provides scan operation and an Easy plug-in process that will be convenient for the consumer. The diagnostic device includes -20 to 70C (-4 to 150F) Storage Temperature. Furthermore, it offers External Power provided by the vehicle battery of 8.0 to 18.0 V. Apart from these, the scanner gadget serves a bright screen and a backlight feature.
Special one-click I/M readiness key button: – quick-checks State Emissions readiness and drive cycle verification.
RED LED: – indicates there is a problem in one or more of the vehicle’s systems. The red LED also indicates DTCs are present. DTCs display on the scan tool’s display. In this case, the MIL on the vehicle’s instrument panel will light steady
YELLOW LED: – indicates there is a possible problem. A “Pending†DTC is present and/or some of the vehicle’s emission monitors have not run their diagnostic testing.
GREEN LED: – indicates that engine systems are running normally (The monitors on the vehicle are active and performing their diagnostic testing is in the allowed limit, and no DTCs are present).
ENTER/Exit BUTTON: – confirms a selection (or an action) from a menu. Or returns to previous menu.
SCROLL BUTTON: – scrolls through menu items
OBD II CONNECTOR: – connects the scan tool to the vehicle’s Data Link Connector (DLC).
USB PORT: – connects the scan tool to the Mac or Windows PC for upgrading.
LCD DISPLAY: – displays menus and test results
The simple & user-friendly design make Autel OBD2 scanner Autolink Al329 easy to use for every! If you are a DIY user or car enthusiast, this OBD2 diagnostic tool can be appropriate to offer you the functions you need yet very affordable.
Lifetime Software Updation
Autel AL329 OBD2 scanner can be update at anytime anywhere on a PC.
Plug & Play
Autel AL329 is very easy to use. All you need to do is to plug it to the tested vehicle and you just can perform all the functions you want to.
Super Portable !
The compact & stylish design make Autel AL329 a easy on-to -go car code reader and can be used at anytime anywhere.
Technical Details
Manufacturer ‎Autel
Brand ‎Autel
Model ‎AL329
Item Weight ‎5.5 ounces
Product Dimensions ‎4.63 x 2.83 x 0.71 inches
Country of Origin ‎China
Item model span> ‎Autolink AL329
Manufacturer Part span> ‎Autolink AL329
Signup today to claim your Discount. Get Started before it's too late!
