100% Nomex Endless Felt For Heat Transfer Printing Machine

Description:

Thermal transfer printing felt belt also called seamless felt belt,no joints endless felt belt. It is made of special high quality raw material:100% Nomex,the heat resistant could be 280c degree. That kind of felt belt suitable for transfer printing machine,such as Italy Farah,Rafah,Mantian,Santex,Japan East Valley,Texas691.692,Haining Shrink Machine,Monti, Lemaire, Bater, Stork, Futanet, Gessner etc.

Specification:

Color:White

Technology:Needled punched

Material:Nomex

Material Feature:Heat Resistant

Thickness:6mm,8mm,10mm

Width:600-3500mm

Length:1800-30000mm

Continual temperature:220℃

Peaking temperature:280℃

Density:2800g/m²-3600g/m²

Advantage

1. Selection Of Brand Raw Material,Common Specifications Have Temperature 160-180℃ And 220-280℃.

2. The Felt Belt Contains Heat Shrinkable Fiber Material Inside,The Felt Will Automatically Shrink After Heating,Wrapped Tightly.

3. The Belt Surface Formation,Uniform Density,Good Resistance,Long Work Life.

Application

Our high temperature digital printing blanket is used for all kinds of heat transfer machines, large printing factories, large scale factories and so on.

Direction of our felt belt

1. The blanket must be install as the direction of the arrow, fixing both sides of the perimeter

to see if the perimeter is the same.

2. Adjust the machine pressure within 2kg. heat up to 150 ℃, idle for 2 hours; heat up to

170℃, idle for 2 hours; heat up to 190℃, idle 3 hours( important); heat up to 200℃,

idle for 2 hours.

3. Then the belt will suitable for your machine, you can adjust the machine pressure in 3--5kg

according to your needed and start to printing.